•Drying temperature and dryness level are preset when you choose an Auto Dry Cycle. You can select a different dryness level, depending on your load, by pressing Dryness Level and choosing More, Normal or Less.
NOTE: You cannot use the Time Adjust and you cannot choose a Temperature with the Auto Dry Cycles.
•If you wish to adjust the cycle length of a Timed Cycle, press the Time Adjust (More Time or Less Time) arrows. Adjust the temperature of a Timed Cycle by pressing Temperature until the desired temperature is selected.
NOTE: You cannot choose a dryness level with Timed Cycles.
Follow the progress of your dryer with the drying Status indicator
lights.
STATUS
Wet _i
Dar_
Cool Down
ClotUresDry
Wrinkle 6uald
Che¢ktil, t Screen(_
Wet
The Wet light illuminates at the beginning of an Auto Cycle if a wet item is detected.
•In an Auto Cycle, if a wet item is not detected after approximately 5 minutes, the dryer goes directly into Cool Down and the Cool Down and WRINKLE GUARD®indicators illuminate, if selected.
•In a Timed Cycle, wet items are not detected. The dryer will continue to run for the length of time selected, and the Wet light will illuminate. The damp light will not illuminate.
Damp
The Damp light illuminates in an Auto Dry Cycle when the laundry is approximately 80% dry. Damp Dry Signal beeps, if selected. See "Options."
Cool Down
The Cool Down light illuminates during the cool down part of the cycle. Laundry cools for ease in handling.
Clothes Dry
The Clothes Dry light illuminates when the drying cycle is finished. This indicator stays on during WRINKLE GUARD _.
WRINKLE GUARD ®
The WRINKLE GUARD _ light illuminates when this option is selected. This indicator stays on during WRINKLE GUARD _.
Check Lint Screen
The Check Lint Screen light reminds you to check the lint screen. The light illuminates when the user selects a cycle. It goes out when the door is opened, Start is pressed, or after 5 minutes elapses.
Indicator lights
Other indicator lights show Cycle, Options, Modifiers and Cycle Signal settings selected. The display shows the estimated or actual time remaining.
Select the drying cycle that matches the type of load you are drying. See Auto or Timed Preset Cycle Settings charts.
AUTO DRY CYCLES
Cotton | / |
|
Towels |
| Normal |
Heavy |
| Bulky / |
Duty |
| Bedding |
Timed |
| Ultra |
Dry |
| Delicate |
Express |
| Refresh |
Dry | Touch | STEAMCARE |
| Up |
|
TIMED CYCLES |
|
|
Auto Dry Cycles
F
Auto Dry Cycles allow you to match the cycle to the load you are drying. See the following Auto Preset Cycle Settings chart. Each cycle dries certain fabrics at the recommended temperature. A sensor detects the moisture in the load and automatically adjusts the drying time for optimal drying.
Heavy Duty
Use this cycle to get high heat for heavyweight mixed loads, cottons and jeans.
Cotton/Towels
Use this cycle to get high heat for drying heavy fabrics such as towels, sheets or cottons.
Normal
Use this cycle to get medium heat for drying casual business clothes, permanent press blends or work clothes.
Bulky/Bedding
Use this cycle to get medium heat for drying large items that require very long drying times such as jackets, comforters and cotton or polyester fiber filled pillows. Rearrange the load when the Damp Dry signal sounds. This step will aid in the drying process.
Ultra Delicate
Use this cycle to get
21