3 Setting Up
1.Push the setup switch briefly. The "NAME" label and the name of the currently active Pre- set will start flashing.
If no Preset has been stored in memory, the 2nd line of the display shows
2.To select the next Preset, turn the setup switch briefly to the right. To select the previous Preset, turn the setup switch briefly to the left.
3.Having selected the desired Preset, push the setup switch briefly. The "GRP" label and the number of the currently active Frequency Group will start flashing.
4.To select the next higher Frequency Group number, turn the setup switch briefly to the right.
To select the next lower Frequency Group number, turn the setup switch briefly to the left.
5.Having selected the desired Frequency Group, push the setup switch briefly.
"CH" and the number of the currently active Channel start flashing. Each Channel rep- resents one
6.To select the next higher Channel number, turn the setup switch briefly to the right. To select the next lower Channel number, turn the setup switch briefly to the left.
7.Having finished your settings, push the setup switch briefly. This brings up the following screen:
8a If you want to save the selected carrier frequency, push the setup switch briefly. The setting will be saved in memory and the display will change as follows:
8b If you'd rather not save the selected frequency, briefly turn the setup switch to the left or right.
This brings up the following screen:
-Push the setup switch briefly. The transmitter will stay tuned to the original frequency.
28 | PT 4500 |