ELECTRONIC GRILL DISPLAY
on some models
AB
C | D | E | F |
A. Timer display |
| D. Time set button | |
B. Mode indicator lights | E. Start/reset button | ||
C. Mode selection button | F. Hood light on/off button | ||
After 10 seconds a calculated Fuel Time Remaining will appear in the display.
2.The fuel time remaining will be recalculated automatically
NOTE: This recalculated display of fuel time remaining may increase when the grill is used on medium or low settings because the gas consumption is less.
When the 20 lb LP Gas Fuel Tank is Low:
1.The “Fuel Remaining” indicator light will flash when the gas weight is less than 2.64 lbs (1.2 kg).
2.When gas weight is less than 1.76 lbs (0.8 kg) the display for Fuel Remaining will show 00:00 and a tone will sound 2 times every 20 seconds for five minutes. The fuel shutoff valve will not close, unless the Flame Time™ mode is selected.
Mode 2 - Timer
The Timer can be set in hours and minutes up to 12 hours and 59 minutes, then counts down the set time.
Display
The display will turn on when a gas burner is lit. The display will default to Fuel Remaining.
This display will also turn on when the Mode, Timer or Start/ Reset button is pushed. The information displayed will be for the mode of the lit indicator light.
The display area will go blank 10 minutes after the last time that a button was pushed (except the light button).
If the display does not turn on or if “NP” or “E1” is displayed, see “Troubleshooting” section.
Start/Reset
The Start/Reset button starts the Timer and Flame Time™ cycle. This button also stops and resets these features.
Mode
The mode button selects features on the display control.
When the grill is not lit and the Mode button is pushed, it will only display the information for Modes 1 and 2. The grill must be lit for Mode 3 to be activated.
Mode 1 - Fuel Remaining Feature
The fuel remaining feature displays a calculated amount of time (hours and minutes) the grill can remain lit at the current gas usage rate before the 20lb LP gas fuel tank runs out of fuel.
The Fuel Remaining can be checked when the grill is OFF.
To check fuel remaining with the grill OFF:
1.Press Mode button until the indicator light for “Fuel Remaining” comes on. “00:00” will appear in the display. After 10 seconds a calculated Fuel Time Remaining will appear in the display.
To check fuel remaining with the grill burners ON:
1.Press Mode button until the indicator light for “Fuel Remaining” comes on. “00:00” will appear in the display.
To Set:
1.Press the Mode button until the timer indicator light comes on.
2.Press the Time Set Button to increase the time by 1 minute or press and hold the Time Set button to increase the time rapidly.
3.When desired time is set, press the Start/Reset button once to start the timer countdown. When the set time ends, reminder tones will sound.
4.Press Start/Reset button to reset the Timer or cancel the reminder tones.
NOTE: The minute timer will continue counting down until the set time ends or the Start/Reset button is pushed to cancel the timer.
Mode 3 - Flame Time™ Feature
The Flame Time™ feature automatically shuts off gas to the burners 10 minutes after set time has expired. This feature can be set for 1 to 60 minutes.
Flame Time™ can be used to keep grill burning for a set amount of time for grilling or for burn off of the grill grates.
For burn off of grill grates
With the lid closed and the main burners on HI, residue will burn off the main grill grates. After the grill shuts off and is cool, the grates can be scraped off more easily. The recommended time for burn off is 45 minutes.
For Timed Grill “ON”
To set the amount of time for grilling, follow the steps the same as
To set Flame Time™ mode for burn-off:
1.Light all main burners and set them on HI and close the hood.
2.Press the “Mode” button until the indicator light for Flame Time™ comes on.
24