DSS Key Functions | Page 30 |
RngOf
Switches the phones audible ringer on/off. This function does not require any data entered when programmed. The appropriate DSS key lamp is lit whilst this function is on. Pressing the DSS key again turns the function off.
Spres
Replace the display of dialed digits with s characters. This function does not require any data entered when programmed. When this function is on, the appropriate DSS key lamp is lit.
Apear
Set a DSS key to act as an additional call appearance key. For users with call waiting enabled or using call coverage this allows them to handle multiple calls, holding and switching between calls using call appearance keys. This function does not require any data entered when programmed.
HdSet
Activate headset mode. This function does not require any data entered when programmed. When this function is on, the appropriate DSS key lamp is lit.
HGNS+
Put a specified hunt group into night service mode. This function requires entry of the hunt group number when programmed.
4400, 4600, 6400 & TransTalk MDW 9040 Telephones | Page 30 | |
IP Office | 40DHB0002USAL - Issue 7 (2nd October 2003) |