Making Calls, Make a Call, Using the Directory

Making Calls	Page 7

Making Calls

Make a Call

All phones in these series have a handsfree speaker so that you can dial and hear the call progress without having to pickup the handset.

On some models this facility is only one-way so you must use the handset to be heard once the call is connected

To make a call:

1.Dial the number you require.

•If ENTER ACCOUNT appears then you are required to enter an account code before making calls, see page 12.

2.When answered either pickup the handset or, if your phone supports it, continue handsfree, see "Handsfree Operation" on page 12.

3.To end the call either put down the handset or if working handsfree press Spkr .

Using the Directory

The phone can display a directory of group names, extension names or directory names from which you can select and then dial. This feature is

not supported on phones without Menu and keys.

Note: This feature can work in two modes, Classic or Dial Name mode (the default). Contact your System Administrator if unsure which mode your telephone system uses.

To use the directory:

1.Press Menu and select Dir (this feature can also be set under a DSS key, see page 24).

• Alternatively, press Menu twice. Press and then select Dir.

2.Select from INDeX (internal extensions), Group (hunt groups) or Extrn (numbers in the IP Office Directory).

3.The next steps depend on which mode of working your system is using:

•Dial Name Mode

a.Using the letter keys, start dialing the name that you want, eg. for names starting with John dial 5646. Ignore any spaces in the name.

b.The display will show the first match to the letters entered so far. Either enter further letters or:

•Press the and keys on either side of the current name to display the other matches found so far.

•If NO MATCH is displayed press to go back to the previous step. c. When the name you want is shown select Call.

d. If you cannot find the name you want press Exit twice.

•Classic Mode

a. Press the dialpad button that matches the first letter of the name you want. For example, to select L press the 5 key three times.

b. Use the and keys to move through the matching entries. You can press another key on the dialing pad to select a different first letter.

c. When the name you want is shown select Call.

d. If you cannot find the name you want press Exit twice.


4400, 4600, 6400 & TransTalk MDW 9040 Telephones		Page 7
IP Office	40DHB0002USAL - Issue 7 (2nd October 2003)