AT&T 964 Table/Desk Installation, Connect the telephone line cords to the telephone

Page 6

INSTALLATION

NOTE: If you are installing multiple phones in your 964 system, you must install and program one set at a time. If more than one extension is assigned the same extension number, a repeating short ring (error ring) will sound at all extensions. Reassign extension numbers, being sure that each extension has a different number from 11 to 22

INSTALLATION

2Connect the telephone line cords to the telephone.

•Four One-Line Jacks (To use this installation option, you’ll need to purchase two two-line adapters. Adapters are available at retail stores or by calling 1 800 222–3111.)

(see “Assign an Extension Number to Your Phone” in SET UP SYSTEM FEATURES).

Table/Desk Installation

1 Install one 9V battery.
•	Press in on the tabs and remove the telephone base.
•	Use a small Phillips head screwdriver to remove the screw
	and open the battery door.

	Modular
	Telephone Jacks
Two-line	Lines 3 and 4
Adapters

Modular

Telephone Jacks

Lines 1 and 2

Standard

Electrical

Outlet

•	Insert the 9V battery (included), and replace the screw to
	close the battery door.
•	Replace the telephone base.

NOTE: The battery retains telephone memory in the event of a power failure. If power fails, only Line 1 will work to dial and answer incoming calls. No other features will work until power is restored.

Power Cord

Telephone
Line Cords	Telephone Jack L1/L2
	Telephone Jack L3/L4

•Two Two-Line Jacks

Modular

Telephone Jack

Lines 3 and 4

	Modular	Standard
	Telephone Jack
		Electrical
	Lines 1 and 2
		Outlet

Power Cord

Telephone	Telephone Jack L1/L2
Line Cords	Telephone Jack L1/L2
	Telephone Jack L3/L4

8

9

Image 6

Contents Four-Line Intercom Speakerphone Part 1 Important Product InformationContents Contents Before YOU BeginGlossary Features List Audible SignalsInstall one 9V battery InstallationTable/Desk Installation Connect the telephone line cords to the telephoneWall Installation Connect the power adapter to the telephone Convenience PortsMount the phone on the wall SET UP System Features SET UP System Features Turn Line Usage On or Off for Each Line Set Delay RingSet the Dial Mode Assign the Prime Line Line PreferenceSet Your Phone for Single Phone Operation Turn Hold Reminder On or OffProgram Home and Local Area Codes Program the Day and Night Times for Auto-AttendantProgram the Centrex Console Delayed Ring Time Set Auto-Attendant Pickup DelayProgram Remote Password Program Message LengthErase All Settings and Return the Phone to Default Turn Toll Saver On or OffMaking or Answering a Call TimerTelephone Operation Call PrivacyLine-in-Use Lights VolumeDo Not Disturb RedialMute Switch Between LinesHold FlashDirectory Operation Transfer a CallStoring Names and Numbers in the Directory Storing a Temporary Tone Signal in a Directory NumberDirectory Operation Storing a Pause in a Directory NumberDialing a Number from the Directory Reviewing Information Stored in the DirectoryChanging Directory Entries Removing a Name and Number from the DirectoryIntercom Operation Basic Intercom OperationsMaking an Intercom Call with the Handset Answering an Intercom Call Switching Between an Intercom Call and a Single-phoneMaking an Intercom Call with the Speakerphone or Headset Making a Single-phoneMaking an Intercom Conference Call Room MonitorCaller ID Operation Call WaitingDisplay Messages Message Waiting and NEW Calls LightCall List View Call List SummarySaving a Number from Call List to the Directory Removing Calls from Call ListDialing a Number from Call List Removing a Specific Call Record from Call ListReset Covm Indicator Time/DateAnswering System Removing Messages Recording a MemoTwo-Way Recording Audible Message AlertToll Saver Turn Auto-Attendant Function On/Off Auto-Attendant Sequence for CallersRecording an Auto-Attendant Outgoing Message Using Multiple Auto-AttendantsReviewing an Auto-Attendant Outgoing Message Removing an Auto-Attendant Outgoing MessageRemote Commands Adding a FAX MachineMulti-phone System Using a Fax Switch Case of DifficultySingle Phone Operation During a Power Failure Line Lights Remain On When No Line is ConnectedTone Signals Do Not Activate a Remote Device System Does Not Respond to Remote CommandsScreen Displays Covm Covm Line Indicator Remains OnLine Groups Incoming Calls Are Dropped By Auto-AttendantExpanding the 964 System Centrex OperationIndex Setting Ring Delay DurationAnswering a Delayed Ring Picking Up Another Station’s LineDtad Intercept Page Four-Line Intercom Speakerphone Directory Operation pages Four-Line Intercom Speakerphone Wallet Card 6/2/2000 231 PM Page 1 1,1Remote Command Press