AT&T 964 user manual Convenience Ports, Connect the power adapter to the telephone

Page 8

INSTALLATION

INSTALLATION

6Connect the power adapter to the telephone.

Use only the power adapter provided with this product. To obtain a replacement, call 1 800 222–3111.

Plug one end of the power adapter into the jack labeled ADAPTER on the back of the phone.

7Check for dial tone.

Lift the handset and listen for a dial tone. If you cannot hear a dial tone, turn to IN CASE OF DIFFICULTY in this manual.

8Mount the phone on the wall.

• Four One-Line Jacks

	Modular	Standard
		Electrical
	Telephone Jacks
		Outlet
	Lines 3 and 4

		Power Cord

9Plug the power adapter into a standard electrical outlet not controlled by a wall switch.

10Initialization.

As soon as you connect the power cord, the system runs a quick self-test and the screen displays Initializing for about 15 seconds. When the test is complete, the system enters an initial setup mode (this happens the first time you plug in the unit only) and the screen displays press PROG to setup your phone. See SET UP SYSTEM FEATURES beginning on page 15.

Convenience Ports

If you want to connect another device (such as a modem or fax machine) to the wall jack, you can use the jacks on the phone labeled AUX. These convenience ports use Lines 3 and 4; a call picked up on Line 3 or 4 at another extension may interrupt a fax, modem, or message transmission.

•Four One-Line Jacks

	Modular	Modular Telephone Jacks
	Telephone
		Lines 1 and 2 with
	Jacks
		Two-line	Adapter
	Lines 3 and

	4 with		Standard
	Two-line
Modular Telephone Jacks			Electrical
	Adapter
Lines 1 and 2			Outlet

•Two Two-Line Jacks

Power Cord

Modular

Telephone Jack

Lines 3 and 4

Standard

Electrical

Outlet

Power Cord

Telephone Jack Aux L4

Telephone Jack Aux L3

Modular

Telephone Jack

Lines 1 and 2

Telephone Jack L1/L2 Telephone Jack L3/L4

12

13

Image 8

Contents Four-Line Intercom Speakerphone Part 1 Important Product InformationContents Contents Before YOU BeginGlossary Features List Audible SignalsInstallation Table/Desk InstallationInstall one 9V battery Connect the telephone line cords to the telephoneWall Installation Mount the phone on the wall Connect the power adapter to the telephoneConvenience Ports SET UP System Features SET UP System Features Set Delay Ring Set the Dial ModeTurn Line Usage On or Off for Each Line Assign the Prime Line Line PreferenceTurn Hold Reminder On or Off Program Home and Local Area CodesSet Your Phone for Single Phone Operation Program the Day and Night Times for Auto-AttendantSet Auto-Attendant Pickup Delay Program Remote PasswordProgram the Centrex Console Delayed Ring Time Program Message LengthErase All Settings and Return the Phone to Default Turn Toll Saver On or OffTimer Telephone OperationMaking or Answering a Call Call PrivacyVolume Do Not DisturbLine-in-Use Lights RedialSwitch Between Lines HoldMute FlashDirectory Operation Transfer a CallStoring a Temporary Tone Signal in a Directory Number Directory OperationStoring Names and Numbers in the Directory Storing a Pause in a Directory NumberReviewing Information Stored in the Directory Changing Directory EntriesDialing a Number from the Directory Removing a Name and Number from the DirectoryMaking an Intercom Call with the Handset Intercom OperationBasic Intercom Operations Switching Between an Intercom Call and a Single-phone Making an Intercom Call with the Speakerphone or HeadsetAnswering an Intercom Call Making a Single-phoneMaking an Intercom Conference Call Room MonitorCaller ID Operation Call WaitingMessage Waiting and NEW Calls Light Call ListDisplay Messages View Call List SummaryRemoving Calls from Call List Dialing a Number from Call ListSaving a Number from Call List to the Directory Removing a Specific Call Record from Call ListReset Covm Indicator Time/DateAnswering System Removing Messages Recording a MemoToll Saver Two-Way RecordingAudible Message Alert Turn Auto-Attendant Function On/Off Auto-Attendant Sequence for CallersUsing Multiple Auto-Attendants Reviewing an Auto-Attendant Outgoing MessageRecording an Auto-Attendant Outgoing Message Removing an Auto-Attendant Outgoing MessageMulti-phone System Remote CommandsAdding a FAX Machine Single Phone Using a Fax SwitchCase of Difficulty Line Lights Remain On When No Line is Connected Tone Signals Do Not Activate a Remote DeviceOperation During a Power Failure System Does Not Respond to Remote CommandsCovm Line Indicator Remains On Line GroupsScreen Displays Covm Incoming Calls Are Dropped By Auto-AttendantExpanding the 964 System Centrex OperationSetting Ring Delay Duration Answering a Delayed RingIndex Picking Up Another Station’s LineDtad Intercept Page Four-Line Intercom Speakerphone Directory Operation pages Four-Line Intercom Speakerphone Wallet Card 6/2/2000 231 PM Page 1 1,1Remote Command Press