AT&T 964 user manual SET UP System Features

Page 9

INSTALLATION

SET UP SYSTEM FEATURES

• Two Two-Line Jacks

Use the Navigation buttons to program or change the system features setup.

Modular

Telephone Jack

Lines 3 and 4

Modular

Telephone Jack

Lines 1 and 2

	Store your
	selection and	Scroll through
	move to next	Scroll through
	feature	options
Standard
Electrical	Enter	Confirm
Outlet	Programming	Confirm
	mode	option choice
	mode
Power Cord		Used when
		resetting
		features to
	Exit Programming	default settings
	mode

•Press Gto enter the Programming mode. The screen displays:

Telephone Jack Aux L4 Telephone Jack Aux L3

Telephone Jack L1/L2

Telephone Jack L3/L4

NOTE: If you do not press a key to continue programming within 20 seconds, the system automatically exits the Programming mode.

•Press -or +repeatedly to move through the list of options.

•Press >to choose the option currently displayed.

•Press Sto store your selections and return to the ‘home screen’ for the feature currently displayed.

Feature

Options

You can set up one feature at a time or you can set up a feature and then move on to set up another feature. After you change one feature, press

+or -to select another feature. When you are finished with features setup, press Eto exit Programming mode.

NOTE: After a feature is successfully programmed, the system beeps once. If the system beeps twice, repeat the steps to set up the feature.

14

15

Image 9

Contents Part 1 Important Product Information Four-Line Intercom SpeakerphoneContents Before YOU Begin ContentsGlossary Audible Signals Features ListTable/Desk Installation InstallationInstall one 9V battery Connect the telephone line cords to the telephoneWall Installation Connect the power adapter to the telephone Convenience PortsMount the phone on the wall SET UP System Features SET UP System Features Set the Dial Mode Set Delay RingTurn Line Usage On or Off for Each Line Assign the Prime Line Line PreferenceProgram Home and Local Area Codes Turn Hold Reminder On or OffSet Your Phone for Single Phone Operation Program the Day and Night Times for Auto-AttendantProgram Remote Password Set Auto-Attendant Pickup DelayProgram the Centrex Console Delayed Ring Time Program Message LengthTurn Toll Saver On or Off Erase All Settings and Return the Phone to DefaultTelephone Operation TimerMaking or Answering a Call Call PrivacyDo Not Disturb VolumeLine-in-Use Lights RedialHold Switch Between LinesMute FlashTransfer a Call Directory OperationDirectory Operation Storing a Temporary Tone Signal in a Directory NumberStoring Names and Numbers in the Directory Storing a Pause in a Directory NumberChanging Directory Entries Reviewing Information Stored in the DirectoryDialing a Number from the Directory Removing a Name and Number from the DirectoryIntercom Operation Basic Intercom OperationsMaking an Intercom Call with the Handset Making an Intercom Call with the Speakerphone or Headset Switching Between an Intercom Call and a Single-phoneAnswering an Intercom Call Making a Single-phoneRoom Monitor Making an Intercom Conference CallCall Waiting Caller ID OperationCall List Message Waiting and NEW Calls LightDisplay Messages View Call List SummaryDialing a Number from Call List Removing Calls from Call ListSaving a Number from Call List to the Directory Removing a Specific Call Record from Call ListTime/Date Reset Covm IndicatorAnswering System Recording a Memo Removing MessagesTwo-Way Recording Audible Message AlertToll Saver Auto-Attendant Sequence for Callers Turn Auto-Attendant Function On/OffReviewing an Auto-Attendant Outgoing Message Using Multiple Auto-AttendantsRecording an Auto-Attendant Outgoing Message Removing an Auto-Attendant Outgoing MessageRemote Commands Adding a FAX MachineMulti-phone System Using a Fax Switch Case of DifficultySingle Phone Tone Signals Do Not Activate a Remote Device Line Lights Remain On When No Line is ConnectedOperation During a Power Failure System Does Not Respond to Remote CommandsLine Groups Covm Line Indicator Remains OnScreen Displays Covm Incoming Calls Are Dropped By Auto-AttendantCentrex Operation Expanding the 964 SystemAnswering a Delayed Ring Setting Ring Delay DurationIndex Picking Up Another Station’s LineDtad Intercept Page Four-Line Intercom Speakerphone Directory Operation pages Wallet Card 6/2/2000 231 PM Page 1 1,1 Four-Line Intercom SpeakerphoneRemote Command Press