WIRE SPINDLE ADAPTERS
K435 - Permits 14 lb. (6 kg) Innershield coils to be mounted on 2" (51 mm) O.D. spindles.
K363P - Adapts Lincoln Readi-Reel coils of electrode 30 lb. (14 kg) and 22 lb. (10 kg) to a 2" (51 mm) spin- dle. Durable molded plastic one piece construction. Designed for easy loading; adapter remains on spin- dle for quick changeover.
GUN AND CABLE ASSEMBLIES
Anumber of Fast-MateTM air cooled and water cooled gun and cable assemblies as well as fume extraction models are available for use with the Power Feed 11. See the appropriate Magnum literature for detailed information.
K1536-1 WATER FLOW SENSOR KIT
This kit is intended to be used as a means of stopping wire feeding in the event that the water cooler (for a water cooled gun) is not turned on. Water cooled guns can be damaged very quickly if they are used even momentarily without water flowing.
The K1536-1 has two control leads coming from the unit that become electrically common when water is flowing. The .25 inch tab terminals of leads 570 and 572, inside the feed head case, are disconnected from each other. Then the flow sensor control wires are connected to leads 570 and 572. Refer to the instruc- tions that come with flow sensor kit for detailed instal- lation instructions.
K659-1 GAS GUARD REGULATOR
Adjustable flow regulator with removable adjuster key for CO2 and Argon blend gases. Mounts onto feeder inlet, and reduces gas waste and arc start “blow” by reducing surge caused by excess pressure in supply hose.
Install the 5/8-18 male outlet of the regulator to the 5/8-18 female gas inlet on the back panel of the wire drive. Secure fitting with flow adjuster key at top. Attach gas supply to 5/8-18 female inlet of regulator per instructions in the INSTALLATION section.
K1649-1 MOUNTING BRACKET-
