Lincoln Electric IM613-B Accessories, Table C.1 Drive Roll and Guide Tube Kits, Cored Electrode

C-1	ACCESSORIES				C-1
	TABLE C.1 – DRIVE ROLL AND GUIDE TUBE KITS
	Wire Size			4-Roll
				Drive
				(4-Driven)
	Solid Steel Electrode
	0.023” - 0.025”	(0.6 mm)	KP1505 - 030S
	0.030”	(0.8 mm)	KP1505 - 030S
	0.035”	(0.9 mm)	KP1505 - 035S
	0.040”	(1.0 mm)	KP1505 - 045S*
	0.045”	(1.2 mm)	KP1505 - 045S*
	0.052”	(1.4 mm)	KP1505 - 052S
	1/16”	(1.6 mm)	KP1505 - 1/16S
	5/64”	(2.0 mm)	KP1505-5/64
	3/32”	(2.4 mm)	KP1505-3/32
	Cored Electrode
	0.030	(0.8 mm)	KP1505 - 035C
	0.035”	(0.9 mm)	KP1505 - 035C
	0.040”	(1.0 mm)	KP1505 - 045C
	0.045”	(1.2 mm)	KP1505 - 045C
	0.052”	(1.4 mm)	KP1505 - 052C
	1/16”	(1.6 mm)	KP1505 - 1/16C
	0.068”	(1.7 mm)	KP1505 - 068
	5/64”	(2.0 mm)	KP1505 - 5/64
	3/32”	(2.4 mm)	KP1505 - 3/32
	7/64” Lincore Hard Facing	(2.8mm)	KP1505 - 7/64H
	7/64”	(2.8mm)	KP1505 - 7/64
	.120”	(3.0mm)	KP1505 - 120
	Aluminum Electrode
	0.035”	(0.9 mm)	KP1507 - 035A
	0.040”	(1.0 mm)	KP1507 - 040A
	3/64”	(1.2 mm)	KP1507 - 3/64A
	1/16”	(1.6 mm)	KP1507 - 1/16A
	3/32”	(2.4 mm)	KP1507 - 3/32A

* Included with K1636-1 Power Feed-11 (Europe) only.

The KP1507 series of drive roll kits contain a number of com- ponents, in addition to the drive rolls, to optimize the wire feeder for aluminum wire feeding. These components are specifically designed to protect the aluminum wire from abra- sion and deformation, thereby avoiding many common alu- minum feeding problems.

POWER FEED 11