OPERATION
To Select Mode Operation
1 | Press the START/STOP button (Fig.6 P). |
The indoor unit’s OPERATION indicator lamp (red) (Fig. 3 5) will light. | |
| The air conditioner will start operation. |
2 | Press the MASTER CONTROL button (Fig.6 K) to se- |
lect the desired mode. |
Each time the button is pressed, the mode will change in the following order:
sAUTO | sCOOL | s DRY | sFAN |
About three seconds later, the entire display will reappear.
To Set the Thermostat
Press the SET TEMP. buttons (Fig. 6 L).
button: Press to raise the thermostat setting. 
button: Press to lower the thermostat setting.
●Thermostat setting range:
Cooling/Drying | 64 to 88 °F |
Fan | 62 to 88 °F |
About three seconds later, the entire display will reappear.
NOTE:
●During Fan mode, set the unit to “– – “ for continuous fan operation regard- less of room temperature.
The thermostat setting should be considered a standard value, and may differ somewhat from the actual room temperature.
Example: When set to COOL
Example: When set to 80 °F
To Set the Fan Speed
Press the FAN CONTROL button (Fig. 6 O).
Each time the button is pressed, the fan speed changes in the following order:
sAUTO sHIGH sMED sLOW sQUIET
About three seconds later, the entire display will reappear.
When set to AUTO:
Cooling : As the room temperature approaches that of the thermostat setting, the fan speed becomes slower.
Fan : The fan will operate at the optimum speed in accordance with the room temperature in the vicinity of the indoor unit.
When set to QUIET:
SUPER QUIET operation begins. The indoor unit’s airflow will be reduced for quieter operation.
●SUPER QUIET operation cannot be used during Dry mode. (The same is true when dry mode is selected during AUTO mode operation.)
●During SUPER QUIET operation, Cooling performance will be reduced some- what.
Example: When set to AUTO
In order to increase the drying effect during quiet cooling operation, the fan of the indoor unit may stop.