SM 2610008289
Unpacking and Checking
Contents
To avoid injury from unexpected starting or ! WARNING electrical shock, do not plug the power cord into a
source of power. This cord must remain unplugged whenever you are working on the table saw.
Model
1.Unpacking and Checking Contents. Separate all parts from packing materials and check each one with the illus rationt and the list of Loose Parts to make certain all items are accounted for before discarding any packing material.
If any parts are missing, do not attempt to ! WARNING assemble the table saw. Do not plug in the power
cord or turn on the switch until the missing parts are obtained and are installed correctly.
Parts in Carton
Item | Description | Qty. |
1. | Table Saw Assembly | 1 |
2. | Miter gauge | 1 |
3. | Rip fence and handle | 1 |
4. | Blade elevation wheel handle | 1 |
5. | Blade guard assembly | 1 |
6. | Blade wrenches | 2 |
7. | 1 | |
8. | Table insert | 1 |
9. | Push stick | 1 |
10. | Long top plates | 2 |
11. | Short top plates | 2 |
12. | Long support plates | 2 |
13. | Short support plates | 2 |
14. | Legs | 4 |
15. | Rubber feet | 4 |
16. | Hardware kit (not shown) | 1 |
Assembly Time
The expected time to assemble and properly adjust this saw is two hours.
1
2
4
3
5 | 6 |
8 
9
7
11
10
13 
12
14 15
28.