Skil 3310 manual Using Carbide-Tipped Blades

SM 2610008289 02-10:3310 Table Saw 2/2/10 8:38 AM Page 36

6.To tighten the arbor nut 4, use the open-end wrench 7 and align the wrench jaws on the flats of the flange to keep the arbor from turning. Place the box-end wrench 8 on the arbor nut 4 and turn clockwise (to the rear of the saw table) (Fig. 16).

7.Install the table insert 1 in the table recess. (Figure 14).

To avoid injury from a thrown workpiece, blade part, or blade contact, never operate the saw without the proper insert in place. Use the table insert when sawing. Use the dado insert when using a dado blade.

Using Carbide-Tipped Blades

Handle carbide-tipped blades carefully. Carbide is very brittle and can be easily damaged. Use caution when you install, use or store the blades. Do not use a carbide-tipped blade that is bent or has bent teeth, or if the blade has cracks, is broken, or has missing/loose carbide tips. Do not operate a carbide-tipped blade faster than its recommended speed.

Read, understand and follow all warnings and instructions provided with your carbide-tipped blades.

FIG. 16

	8
7	4

36.