Porter-Cable 1000001703 Electrical Grounding Failure to, Risk from Flying Objects

• Repairs attempted by unqualified			• Any electrical wiring or repairs
personnel can result in serious			required on this product should be
injury or death by electrocution.			performed by authorized service
			center personnell in accordance
			with national and local electrical
			codes.
• Electrical Grounding: Failure to			• Make certain that the electrical
provide adequate grounding to			circuit to which the compressor
this product could result in serious			is connected provides proper
injury or death from electrocution.			electrical grounding, correct voltage
Refer to "Grounding Instructions"			and adequate fuse protection.
paragraph in the "Installation"
section.
		HAZARD
		RISK FROM FLYING OBJECTS
	WHAT CAN HAPPEN		HOW TO PREVENT IT
• The compressed air stream can			• Always wear certified safety equip-
cause soft tissue damage to			ment: ANSI Z87.1 eye protection
exposed skin and can propel dirt,			(CAN/CSA Z94.3) with side shields
chips, loose particles, and small			when using the compressor.
objects at high speed, resulting in			• Never point any nozzle or sprayer
property damage or personal injury.			toward any part of the body or at
			other people or animals.
			• Always turn the compressor off
			and bleed pressure from the air
			hose and air tank before attempt-
			ing maintenance, attaching tools or
			accessories.
		HAZARD
		RISK OF HOT SURFACES
	WHAT CAN HAPPEN		HOW TO PREVENT IT
• Touching exposed metal such as			• Never touch any exposed metal
the compressor head, engine head,			parts on compressor during or
engine exhaust or outlet tubes, can			immediately after operation.
result in serious burns.			Compressor will remain hot for
			several minutes after operation.
			• Do not reach around protective
			shrouds or attempt maintenance
			until unit has been allowed to cool.

5 - ENG 1000001703