Hitachi NR90AA instruction manual Safety, Always Wear EYE Protector Never USE Bottled Gases

Page 4

English

SAFETY

IMPORTANT SAFETY INSTRUCTIONS

FOR USING NAILERS

READ ALL INSTRUCTIONS

DANGER

1. ALWAYS WEAR EYE PROTECTOR.

2. NEVER USE BOTTLED GASES.

When operating the Nailer, always wear eye protector, and make sure others in work area wear eye protector, too.

Eye protector must conform to the requirements of American National Standards Institute, ANSI Z87.1 and provide protection against flying particles both from the front and side.

The employer must enforce the use of eye protector by the Nailer operator and others in work area.

Never use oxygen, combustible gases or any other bottled gases as a power source for the Nailer.

Use of the above gases is dangerous, as the Nailer will explode. Use only clean, dry, regulated compressed air.

WARNING

3. DO NOT EXCEED 120 psi.

Do not exceed maximum recommended air pressure 120 psi (8.3 bar 8.5 kgf/cm2).

Never connect the Nailer to pressure which potentially exceeds 200 psi (13.7 bar 14 kgf/cm2) as the Nailer can burst.

4.NEVER POINT NAILER TOWARD YOURSELF OR ANYONE ELSE.

Always assume the Nailer contains fasteners.

Never point the Nailer toward yourself or anyone else, whether it contains fasteners or not.

If fasteners are mistakenly driven, it can lead to severe injuries.

Never engage in horseplay with the Nailer. Respect the Nailer as a working implement.

5.NEVER CARRY WITH FINGER ON TRIGGER.

Remove finger from trigger when not driving fasteners. Never carry the Nailer with finger on trigger since you could drive a fastener unintentionally and injure yourself or someone else.

Always carry the Nailer by the handle only.

6.ALWAYS WEAR EAR AND HEAD PROTECTOR.

Always wear ear protector to protect your ears from loud noise.

Always wear head protector to protect your head from flying objects.

— 4 —

Image 4
Contents Mode D’EMPLOI ET Instructions DE Securite PeligroContents Definitions of Signal Words Important InformationSafety Always Wear EYE Protector Never USE Bottled GasesNever Point Nailer Toward Yourself or Anyone Else Never Carry with Finger on TriggerKeep Work Area Clean Check for Live WiresStore Nailer Properly Never USE in Presence of Flammable Liquids or GasesEMPLOYER’S Responsibilities Disconnect AIR Hose from Nailer WhenMaintain Nailer with Care Stay AlertOperation Name of PartsSpecifications AccessoriesStandard Accessories Nail SelectionOptional Accessories ApplicationsBefore Operation Working EnvironmentTesting the Nailer LubricationCold Weather Care Air consumptionAdjusting AIR Pressure Loading NailsNailer Operation Methods of Operation Adjusting the Nailing Depth Using the Nose CAPChanging the Exhaust Direction Disconnect AIR Hose from NailerMaintenance and Inspection MaintenanceService and Repairs Action WHY HOW Problem Check Method CorrectionDefinition DES Mots DE Signalisation Information ImportanteSecurite AvertissementRanger LE Cloueur Correctement Maintenir L’AIRE DE Travail PropreEloigner LES Visiteurs Porter UN Habillement ApproprieResponsabilites DE L’EMPLOYEUR Debrancher LE Tuyau D’AIR DU Cloueur QuandEntretenir Soigneusement LE Cloueur Rester SUR SES GardesUtilisation NOM DES PiecesAccessoires Standard Accessoires AvertissementSelection DES Clous Accessoires EN Option Avant L’UTILISATIONEnvironnement DE Travail Avertissement Alimentation D’AIRGraissage Entretien PAR Temps FroidEssai DU Cloueur Consommation d’airReglage DE LA Pression D’AIR Avertissement Chargement DES Clous Avertissement LE Cloueur NE Doit PAS Fonctionner  LE Cloueur Doit FonctionnerUtilisation DU Cloueur Methodes D’UTILISATION Reglage DE LA Profondeur DE Clouage Changement DU Sens ’ECHAPPEMENTUtilisation DU Capuchon DE BEC Debrancher LE Tuyau D’AIR DU CloueurEntretien Entretien ET InspectionEntretien ET Reparations Avertissement Inspection du magasinProbleme Verification Correction Action Pourquoi CommentInformación Importante Definición DE LAS Palabras ClaveSeguridad AdvertenciaUtilice Siempre Gafas Protectoras Para LOS Ojos No Utilice Nunca Bombonas DE GASGuarde Adecuadamente EL Martillo Neumático Mantenga EL Área DE Trabajo LimpiaMantenga a LOS Visitantes Alejados 11. Vístase AdecuadamenteResponsabilidades DEL Empresario Permanezca AlertaManeje Correctamente EL Martillo Neumático Mantenga EL Martillo Neumático CON CuidadoOperación NomenclaturaEspecificaciones Selección DE PuntasAccesorios Advertencia Accesorios EstándarAccesorios Opcionales AplicacionesAntes DE LA Operación Entorno DE Trabajo AdvertenciaLubricación Cuidados Para Climas FríosPrecaución Prueba DEL Martillo Neumático PeligroAjuste DE LA Presión DE Aire Advertencia Carga DE Puntas AdvertenciaOperación DEL Martillo Neumático Métodos DE Operación Ajuste DE LA Profundidad DE Clavado Cambio DEL Sentido DEL Aire DE EscapeDesconecte LA Manguera DE Aire DEL Martillo Neumático Utilice Siempre Gafas Protectoras Para LOS OjosUtilización DE LA Tapa Para EL Morro Mantenimiento Mantenimiento E InspecciónMantenimiento E Inspección Advertencia Inspección del cargadorProblema Método DE Comprobación Solución Acción Para CómoEspañol 3MM 4MM5MM 6MMKestrel Road Mississauga on L5T 1Z5