FIG. 1
B
COMPONENTS (FIG. 1)
WARNING: Never modify the power tool or any part of it. Damage or personal injury could result.
A. Trigger switch | E. Soft mount |
B. Spindle lock button | F. Trigger lock off button |
C. Side handle | G. Wheel guard |
D. Spindle | H. |
INTENDED USE
This grinder is designed for professional grinding, sanding, wire brushing, polishing or abrasive,
DO NOT use under wet conditions or in presence of flammable liquids or gases.
This grinder is a professional power tool. DO NOT let children come into contact with the tool. Supervision is required when inexperienced operators use this tool.
Features
SWITCH (FIG. 1)
This tool is controlled by a trigger switch (A). A
ROTATING GEAR CASE
For applications in which a tool will be dedicated for uses in edge grinding and finishing work, the gear case may be rotated 90 ° left or right of its original position. See page 9 for instructions on rotating the gear case.
SPINDLE LOCK (FIG. 2}
The spindle lock pin is provided to prevent the FIG.2 B spindle from rotating when installing or
removing wheels. Operate the spindle lock pin only when the tool is turned off and unplugged from the power source. To engage the lock, depress the spindle lock button (B) and rotate the spindle until you are unable to rotate it further.
_, CAUTION: Never depress the spindle lock button while the grinder is running. Never turn on the grinder while the spindle lock button is depressed. Damage to your tool or personal injury may result.
SOFT MOUNT
The grinder is equipped with a soft mount, enabling easy wheel installation and removal.
Accessories and Attachments
It is important to choose the correct guards, backing pads and flanges to use with grinder accessories. See the chart on pages
A WARNING: Accessories must be rated for at least the speed recommended on the tool warning label Wheels and other