Samsung SMO-150MP/UMG, SMO-150TRP manual Motion Occurrence, Loss Occurrence, Eng-15

2)Press ENTER (in the middle of the Rotary Wheel) to replay the event in Event Replay mode. Up to 16 screens can be replayed centering on the time of the Alarm. The duration of Replay is displayed in a graph. Turn the Rotary Wheel during the Replay to forward or reverse the stored screens one by one.

Press ENTER to terminate the Event Replay. The Event Replay will continue until ENTER has been pressed.

2)Press ENTER (in the middle of the Rotary Wheel) to replay the event in Event Replay mode. Up to 16 screens can be replayed centering on the time of the Motion occurrence.

The duration of the replay is displayed in a graph.

Turn the Rotary Wheel during the Replay to forward or reverse the stored screens one by one.

Press ENTER to terminate the Event Replay. The Event Replay will continue until ENTER has been pressed.

04/01/01 12:30:30

1EVENT

	CH2	CH3
CH4	CH5	CH6
		ALARM
CH7	CH8	04/01/01
		12:29:30

3)Alarm occurrence information is stored in the “EVENT LIST”.

4)Alarm Out (HOT, COLD) signals are active during the “ALARM HOLD TIME. ”

•ALARM HOLD TIME : Time during which the Alarm function is carried on after the Alarm is first detected. Alarm Hold Time is reset automatically when Event Replay is turned on.

5)Recording output continues in Normal mode until the Alarm is cleared. The recording frequency of the corresponding channel increases.

6)Signals change as the Alarm occurs and later clears.

VCR Trigger			Trigger ignored
Recording
	Time Lapse Mode		Normal Mode		Time Lapse Mode
Output
Alarm Output
Alarm Reset Output
						150ms or Above
		Alarm/Motion Occurrence		Alarm Reset

2. Motion Occurrence

The Motion option only becomes available when a camera with Motion features is connected.

1)When a Motion trigger is received, a warning buzzer sounds and the screen is divided into 9 Live-Mode sub-screens. The word “EVENT ”appears on the screen and the Motion occurrence infor- mation is displayed at the bottom right of the screen.

04/01/01		12:30:30
					EVENT
	CH1	CH2			CH3
	CH4	CH5			CH6
	CH7	CH8	M	1	2345678

04/01/01 12:30:30

1EVENT

	CH2	CH3
CH4	CH5	CH6
		MOTION
CH7	CH8	04/01/01
		12:29:30

3)Motion occurrence information is stored in the “EVENT LIST”.

4)Alarm Out (HOT, COLD) signals are active during “ALARM HOLD TIME”.

5)Recording output continues in Normal mode until the Motion is cleared. The recording frequency of the corresponding channel increases.

6)Signal output continues as the Motion occurs and later clears.

3.Loss Occurrence

1)When the Loss occurs, a warning buzzer sounds and the screen is divided into 9 Live-Mode sub-screens. The word “EVENT” and Loss channel appears on the screen and the corresponding channel appears Blue Black.

When more than one Loss occurs, that channel number display switches to Blue-Black with a 1 second interval.

04/01/01		12:30:30	L12345678
				EVENT
	CH1	CH2		CH3
	CH4	CH5		CH6
	CH7	CH8

2)Press ENTER (in the middle of the Rotary Wheel) to replay the event in the Event Replay mode. Up to 16 screens can be replayed centering on the time before the Loss occurrence. The duration of the Replay is displayed in a graph.

Turn the Rotary Wheel during the Replay to forward or reverse the stored screens one by one.

Press ENTER to terminate the Event Replay. The Event Replay will continue until ENTER has been pressed.

04/01/01 12:30:30 L12345678

1EVENT

	CH2	CH3
CH4	CH5	CH6
		LOSS
CH7	CH8	04/01/01
		12:30:00

Eng-15