Wayne-Dalton 3790 Stations or Transmitters to OpenerProgramming Wireless Wall, Red Program Button

❉Station(s) or Transmitter(s) to OpenerProgramming Wireless Wall

Tools Needed:	WARNING
None
	TO AVOID POSSIBLE SEVERE OR FATAL
	INJURY, MANUALLY DISCONNECT THE
	OPENER, USING THE EMERGENCY
	DISCONNECT HANDLE PRIOR TO
	PROGRAMMING REMOTE CONTROLS.

NOTE: The opener can be activated by up to six remote control devices (including Wall Station, Transmitter, and Keyless Entry Devices). If a seventh control is programmed, the first of the program controls will be overwritten and will no longer activate the opener.

Handle In Manual

Door Operated

Position

Motor in

Up Position

Z-Wave enabled

what’s OPENING your world?

With Z-Wave®technology you can control your lights, thermostat andstart your morning coffee, allwiththe single touch of a button.

Find out more:

www.Wayne-Dalton.com/access

Red Program

Button

a. Pull the emergency disconnect handle to the manual door operated position (lower position).

b. On the front cover of the opener, press and release the red program button; the opener will beep once, indicating activation of the program mode. The opener will remain in program mode for 30 seconds. If at the end of 30 seconds the opener has not learned an RF device, the opener will beep once, indicating the learn mode is no longer active.

c. Press and hold the desired transmitter button or wall station light button until the opener beeps once. The transmitter or wall station is now programmed.

No beeping response from the opener during the transmitter or wall station programming indicates a programming failure. Repeat programming Steps a-c.

d. Return the emergency disconnect handle to the motor operated position (upper position).

NOTE: The first transmitter command after programming will only move the door through a six inch up/down cycle. Normal door operations will occur on the second use of the transmitter or wall station.

a	b
c

Light Button

Large Button

	per
	O	at
LED	o
	T	D

Presso

o

Here r

d

Handle In Motor

Operated

Position

40Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need.

You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com