Figure 6/Ilus. 6
Figure 7/Ilus. 7
Figure 8/Ilus. 8
Figure 9/Ilus. 9
Figure 10/Ilus. 10
E n g l i s h
(Loading the Upper Rack, continued) Note: When pushing the upper rack into the dishwasher, push it until it stops against the back of the tub; otherwise the upper spray arm may not connect to the water supply. Depending on the model dishwasher you
have, the upper rack may have features and accessories that will add to its loading versatility. These features and accessories include height adjustments and
The upper rack of of Siemens dishwash- ers is adjustable in one of two ways: 1) the Standard Upper Rack Adjustment, or 2) the RackMatic™ Adjustment. Look to the Model Features Chart on page 6 in this manual to verify which feature your dishwasher has before you attempt the adjustment.
Using the Standard Upper Rack Adjustment
1)Remove the empty upper rack by pulling it out of the dishwasher to the point that it can be lifted upward, as shown in Figure 6.
2)Pull the rack outward and up until the rollers are completely free of the roller guides.
3)
Figure 7.
Using the RackMatic Adjustment
To lower the upper rack:
1)Pull the upper rack out of the dishwasher until it stops rolling.
2)Grasp the rack as shown in Figure 8.
3)Press the RackMatic™ handles inward, as shown in Figure 9, and let the rack drop gently while supporting it with your hands.
To raise the upper rack:
4)Pull the upper rack out of the dishwasher until it stops rolling.
5)You do not need to press the RackMatic™ handles to raise the rack. Grasp the upper rack by the upper edge and gently pull it upward, as shown in Figure 10, until the RackMatic™ handles lock the rack into position.
6)Before you push the upper rack back into the dishwasher, ensure that the rack height is the same on both sides. Otherwise, the dishwasher door will not close and the upper spray arm will not connect to the water circuit.
18 | Operation Fonctionnement Operación |