E n g l i s h
Figure 11/Ilus. 11 |
AHAM DW-1 10 Place Setting
Figure 12/Ilus. 12 |
AHAM DW-1 12 Place Setting
Figure 13/Ilus. 13
Figure 14/Ilus. 14 |
C. Loading the Lower Rack Depending on the model dishwasher you
have, the lower rack may have features and accessories that will add to its loading versatility. These features and accesories include
Place large bowls, pots, and pans upside- down in the lower rack. If your dishwasher has lower rack flip tines, fold them down to accommodate large utensils such as serving spoons and large knives. Figure 11 shows the load pattern for 10 place settings, and Figure 12 shows the load pattern for 12 place settings.
D. Accomodating Extra Tall Items If an item to be loaded into the lower
rack interferes with the upper spray arm or is blocked by the upper rack, simply remove the upper rack and install the Extra Tall Item Sprinkler.
Remove the Upper Rack
The same procedure is used for removing the Standard and RackMatic upper racks.
1.Pull the empty upper rack out of the dishwasher to the point that it can be lifted upward.
2.Pull the rack outward and up until the rollers are completely free of the roller guides.
3.Slide the roller guides back into the
dishwasher tub.
Install the Sprinkler
1.Insert the Sprinkler into the upper rack spray outlet at the back of the dishwasher tub as shown in Figure 13, and turn the Sprinkler clockwise.
2.Place your extra tall item(s) in the lower rack as in Figure 14.
3.Select a wash cyle and start the dish-
washer.
Note: When the cycle is complete, remove the Sprinkler by turning it
Reinstall the Upper Rack
1.Tilt the upper rack upwards and position the upper rack rollers onto the roller guides.
2.Continue pushing the upper rack until the rollers are on the guide.
3.Push the upper rack into the dish washer tub.
20 | Operation Fonctionnement Operación |