The dough hook with the small washer and foot goes into the socket on the side of the mixer nearest the side of the bowl. The other dough hook with the large washer goes into the socket nearest the center of the bowl. See the dough hook symbols located on the front of the mixer head.
About the Worklight Feature
Some of our models have a worklight that lights the area inside the mixing bowl.
As soon as the electric cord is plugged in, the worklight will glow. It will continue to glow until the electric cord is unplugged from the electrical outlet.
Worklight
Beater-Bowl Drive Adjustment
Automatic bowl rotation is factory set. Occasionally, a simple adjustment may be necessary when the bowl fails to rotate.
To make this adjustment, tilt the mixer head back. Hold the mixer head in an upright position and locate the adjustment screw on the underside of the mixer head. Loosen the locking nut and turn the adjustment screw on the underside of the mixer head. Loosen the locking nut and turn the adjustment screw clockwise, to lower the mixer head; or counter clockwise, to raise the mixer head. Retighten the locking nut. The beater with the nylon button should lightly touch the bottom of the mixing bowl.
Adjustment |
|
| Locking | |
Screw |
|
|
| Nut |
|
|
|
| |
Operating Instructions
About the Mix-Finder¨ Dial
The
Rotate the
to decrease mixing speed.
As you rotate the
is aligned with the indicator on top of the mixer head. This numbered speed indicates the speed at which the mixer is operating.
Rotate the
Speed
Indicator
Dial
Mixing
Guide
6