Husqvarna TB1000 EN Possible Incidents, Characteristics, NL Mogelijke Storingen, Eigenschappen

Page 43

EN POSSIBLE INCIDENTS

 

Troubleshooting advice

 

 

 

 

 

PROBLEM

REMEDY

REMARKS

 

 

 

The machine does not start.

Check the start-up process.

 

 

Check that the safety cut-out is in place.

 

 

Check that the connectors are connected to the body of the machine.

 

 

Check whether a wire on the machine is damaged.

 

 

Check the condition of the fuse on the front of the battery pack.

If none of these actions

 

 

 

Check the battery charge level (by starting charging).

solves the problem,

 

 

please contact an

The machine does not reverse.

 

 

approved repairs

No max speed function.

 

centre.

Check whether a wire on the machine is damaged.

 

 

 

The earth drills do not rotate but the

 

 

machine is switched on.

 

 

 

 

 

The charger does not start up.

Check whether a wire on the charger is damaged

 

 

Check the condition of the fuse on the front of the battery pack.

 

 

 

 

CHARACTERISTICS

 

 

TB1000 technical specifications

 

Weight: 31.5 Kg (incl. batteries 12 Kg)

 

 

Operating width: 470mm (6 earth drills) - 300mm (4 earth drills) - 220mm (2 earth drills)

 

Earth drill diameter: 240 mm

 

 

Motor: 36V 800W (approx. 2800 rpm under load)

 

Batteries: 36V 12Ah

 

 

Charger: input: 110V to 250V at 50 to 60 Hz (output: 36V 1.5Ah)

 

Noise pressure on the operator’s ears: 69 dBA

 

NL MOGELIJKE STORINGEN

Voorschriften in geval van fouten / storingen

PROBLEEM

OPLOSSING

OPMERKING

 

 

 

De machine wil niet starten.

Het opstart protocol verifiëren

 

 

Kijken of de veiligheidssleutel op zijn plaats is aangebracht

 

 

Kijken of de connectors naar behoren zijn aangesloten op de machine

 

 

Kijken is er geen enkele draad van de machine beschadigd is

 

 

De staat van de zekering aan de voorzijde van het accu pack controleren

Als het probleem niet

 

 

 

De laad staat van de accu controleren (door een laad proces op te starten).

kan worden opgelost

 

 

aan de hand van deze

 

 

Achteruit rijden is niet mogelijk.

 

instructies, moet u

Geen functie maximale snelheid.

 

contact opnemen met

De oplader gaat niet branden .

een erkende reparateur.

 

De messen draaien niet meer maar de

 

 

machine is wel aan.

 

 

 

 

 

Controleren of er geen enkele draad

Controleren of er geen enkele draad van de machine is beschadigd

 

van de machine is beschadigd.

 

 

 

 

De staat van de zekering aan de voorzijde van het accu pack controleren.

 

 

 

 

EIGENSCHAPPEN

Technische specificaties TB1000

Gewicht : 31.5 kg (waarvan de accu’s 12 kg wegen)

Werk breedte : 470 mm (6 messen) – 300 mm (4 messen) – 220 mm (2 messen)

Diameter messen : 240 mm

Motor : 36V 800W (ongeveer 2800 t/min belast)

Accu’s: 36V 12Ah

Oplader : Ingang : 110V tot 250V en frequentie 50 tot 60 Hz (Uitgang: 36v 1,5 Ah)

Geluidsdruk op de oren van de bediener: 69 dBA

42

Image 43
Contents 523 03 0500650003 12/2008 TB1000IT Sommario EN ContentsDE Inhaltsverzeichnis NL InhoudIT Montaggio Della Macchina EN Machine AssemblyDE Zusammenbau DER Maschine NL Assembleren VAN DE MachineDesembalaje ES Montaje DE LA MáquinaInd Designación Cdad Nr. Omschrijving DE Inhalt des Beutels aNr. Bezeichnung No. DesignationInd. Designación ES Composición de la bolsita de piezas aBeutel a Pouch a Zakje a Busta a Bolsita a Qté IT Montaggio sperone / ruotini di trasferimento DE Sporn / Transportrad MontageEN Fitting the stand / transport wheels NL Monteren stut / transportwielenIT Montaggio delle frese DE Montage der HackmesserEN Fitting the earth drills NL Monteren van de messenFitting the lower steering bars DE Montage der SchutzflügelMontage der unteren Lenkholme EN Fitting the protection wingsIT Montaggio del gruppo stegola EN Fitting the steering bars assemblyDE Montage der Lenkereinheit NL Monteren stuursysteemIT Montaggio del manubrio DE Montage des oberen LenkholmsEN Fitting the upper steering bar NL Monteren bovenstuurIT Collegamento dei connettori EN Connecting the connectorsNL Aansluiten van de connectors DE Anschließen der SteckerEN Fixing the cables Safety cut-outDE Befestigen der Kabel BatterieschalterAufkleber und Lage DE Bedeutung DER AufkleberStickers en plaats waar ze zijn aangebracht EN Definition of the StickersNL Definitie VAN DE Stickers Stickers and their locationsAdesivi e ubicazione IT Significato Delle EtichetteAttenzione Leggere il manuale d’uso Autoadhesivos y ubicaciones ES Definición DE AutoadhesivosIT Istruzioni DI Sicurezza EN Safety InstructionsDE Sicherheitsvorschriften NL VeiligheidsvoorschriftenPreparazione VorbereitungPreparation VoorbereidingFunzionamento / Trasporto Betrieb / TransportOperation / Transport Werking / TransportPage Onderhoud / Opslag / Toebehoren Maintenance / Storage / AccessoriesManutenzione / Rimessaggio / Accessori Instandhaltung / Lagerung / ZubehörSicherheitsanweisungen für die Batterie CleaningBattery safety instructions ReinigungPage IT Descrizione DE BeschreibungEN Description NL BeschrijvingTarghetta identificativa della macchina Typenschild der MaschineMachine identification plate Identificatie plaatje van de machineES Mantenimiento Y Carga DE LA Batería EN Battery Maintenance and ChargingNL Onderhoud EN Opladen VAN DE Accu IT Manutenzione E Carica Della BatteriaPage Initial charging LadeanweisungenErstes Aufladen Charging instructionsBitte Beachten Carica della batteria all’esterno della motozappa Charging the battery outside the machineExternes Aufladen der Batterie Opladen van de accu los van de schoffelmachineHet opladen duurt op zijn minst 8 uur Die Ladedauer beträgt mindestens 8 StundenAlles ist normal Charging operation takes at least 8 hoursInformazioni Pack Batteria EN Battery Pack InformationDE Informationen ZUM Batteriepack NL Inlichtingen Accu PackUbicazione del fusibile Einbaulage der SicherungFuse location Plaats waar de zekering is aangebrachtIT Messa in Funzione DE IngangsetzungEN START-UP NL InwerkinstellingAchtung IT Funzionamento DE BetriebEN Operation NL WerkingPosizione sperone e trasporto Sporn-/Transport-StellungStand and transport position Stand stut en transportInformazioni InformationenInformation InlichtingenFarbe Maschinenstatus Problem / AusfallRot Knippert De spanning van de accu is te laag en men Problema sulla scheda, motore scollegatoProfiteren van het prestatie Vermogen van de machineTechnische Merkmale TB1000 Mögliche PannenKenndaten Abhilfe bei PannenEigenschappen CharacteristicsEN Possible Incidents NL Mogelijke StoringenCaracterísticas Possibili GuastiCaratteristiche ES Posibles Indicentes

TB1000 specifications

The Husqvarna TB1000 is a versatile and powerful tiller designed for both professional landscapers and garden enthusiasts. Renowned for its robustness and reliability, this tiller facilitates soil preparation, ensuring that your garden stands out with lush growth and vitality.

One of the key features of the TB1000 is its powerful engine, which delivers ample torque and speed, enabling it to handle tough soil conditions with ease. The tiller is equipped with a 160cc Honda engine, well-known for its durability and efficiency. This engine allows the TB1000 to cultivate deeper and more effectively than many other tillers in its class, making it a preferred choice for hard-packed or clay soils.

The TB1000 also boasts a unique counter-rotating tilling technology. This feature allows the tines to rotate in the opposite direction of the wheels, resulting in improved soil aeration and mixing. The counter-rotation provides better weed control, breaking up the soil more finely and creating a well-prepared seedbed. This technology ensures that users can achieve professional-grade results with minimal effort.

In terms of design, the Husqvarna TB1000 features adjustable tilling widths, allowing users to customize their tilling experience according to their needs. The tiller can handle widths from 24 inches to 12 inches, making it versatile for different garden sizes and types of planting. The robust steel tines are designed for longevity, ensuring consistent performance throughout the tiller's lifespan.

Comfort and usability are also central to the TB1000's design. The tiller comes with an ergonomic handle that can be adjusted to different heights, accommodating users of various sizes. Moreover, the lightweight construction, coupled with its easy maneuverability, minimizes user fatigue, making long hours in the garden much more enjoyable.

Maintenance is simplified with the TB1000 as well. The easy-access maintenance points ensure that users can carry out routine checks and repairs without hassle. The tiller's design promotes airflow, aiding in cooling and extending engine life.

Overall, the Husqvarna TB1000 is a standout tool in the tilling segment, combining power, advanced technology, and user-friendly features. Whether you’re preparing a new garden bed or maintaining an existing plot, the TB1000 promises to deliver reliable performance and excellent results, transforming your gardening experience into a seamless and satisfying endeavor.