3Com 3CR990-FX-97 manual Installing From Diskette, Upgrading Windows 98 to Windows Me

Installing From Diskette

Upgrading Windows 98 to Windows Me

If you are upgrading a computer from Windows 98 to Windows Me and the computer already has a 3CR990-FX-97 NIC installed, follow the instructions in the WINME.TXT file located in the HELP directory on the EtherCD.

Updating the Network Driver and NIC Software

If you already have a 3CR990-FX-97 NIC installed and want to update the network driver, follow the instructions in “Updating the Network Driver and NIC Software” on page 28.

Installing From Diskette

If your computer does not have a CD-ROM drive, use a PC that has a CD-ROM drive and create installation diskettes from the EtherCD.

NOTE: The installation diskettes allow you to install the network driver and DOS Diagnostics software only. If you want to install the Windows NIC Diagnostics program or desktop management software, you must install them from

the EtherCD.

Making a DOS-Bootable Diskette

For installation and configuration procedures that require you to boot from DOS, you cannot successfully use the MS-DOS prompt from within Windows. Perform a “clean” boot from DOS or use a DOS boot diskette.

NOTE: If the PC or server is running only DOS and a CD-ROM drive is not installed, you must install the NIC software using installation diskettes. For more information about installation diskettes, see the next section, “Creating Installation Diskettes.”

To make a DOS-bootable diskette:

1Insert a blank, formatted diskette in drive A.

2At the DOS prompt, enter: sys a:

System files are copied to the diskette.

3Remove the diskette from drive A and attach a label for future reference.

Creating Installation Diskettes

If you anticipate having to install the driver for the 3CR990-FX-97 NIC without having access to a CD-ROM drive, you can create a set of installation diskettes beforehand using a computer that does have a CD-ROM drive. To start, you will need three blank, formatted floppy diskettes. To create installation diskettes from the EtherCD:

1Turn on the power to the PC and start Windows.

2Insert the EtherCD in the CD-ROM drive. The EtherCD Welcome screen appears.

3Click NIC Software.

4Click Installation Utilities.

5Click Create Installation Diskettes.

The EtherCD Diskette Creation Utility Welcome screen appears.

6Click Next.

11