3Com 3CRWDR101A-75, 3CRWDR101B-75 manual Powering Up, Router, Connecting

Powering Up the Router 19

Powering Up the	To power up the Router:
Router

1 Plug the power adapter into the power adapter socket located on the
	back panel of the Router.
2 Plug the power adapter into a standard electrical wall socket.
3 Press the power button located on the back of the Router.
Connecting the	The first step for installing your Router is to physically connect it to the
Router	telephone socket and then connect it to a computer in order to be able to
	access the Internet. See Figure 5:
	Figure 5 Connecting the Router
	Power
	Supply Unit					3Com OfficeConnect
		Telephone					ADSL Wireless 11g Firewall Router
	Socket
		Splitter/
		Microfilter Block
				Your PC
						Wireless
						Users
1 Run the provided telephone cable from the wall jack providing ADSL
	service to the ADSL port on your Router. When inserting an ADSL RJ-11
	plug, be sure the tab on the plug clicks into position to ensure that it is
	properly seated. If you are using splitterless ADSL service, add low-pass
	filters between the ADSL wall jack and your telephones. (These filters pass
	voice signals through but filter data signals out.)
2	Then:
	■ If you are using a full-rate (G.dmt) connection, your service provider
	will attach the outside ADSL line to a data/voice splitter. In this case