LAN Settings 41

1Enter the Router’s IP Address and Subnet Mask in the appropriate fields. The default IP address is 192.168.1.1.

2If you want to use the Router as a DHCP Server, select On in the DHCP Server field.

3Enter the IP address range in the IP Pool Start Address and IP Pool End Address fields.

4Specify the DHCP Lease time by selecting the required value from the Lease Time drop-down menu. The lease time is the length of time the DHCP server will reserve the IP address for each computer.

5Specify the Local Domain Name for your network (this step is optional).

6Enter the IP address of the NBX Call Processor in the 3Com NBX Call Processor field (this step is optional).

7Check all of your settings, and then click Apply.

DHCP Clients List The DHCP Clients List provides details on the devices that have received IP addresses from the Router. The list is only created when the Router is set up as a DHCP server. A maximum of 253 clients can be connected to the Router.

Figure 29 DHCP Clients List Screen

For each device that is connected to the LAN, the following information is displayed:

IP address — The Internet Protocol (IP) address issued to the client machine.

Page 43
Image 43
3Com 3CRWDR101A-75, 3CRWDR101B-75 manual Dhcp Clients List Screen