3Com 3CRWDR101A-75, 3CRWDR101B-75 manual Dynamic/Fixed IP in 1483 Bridge Mode For Multiple PCs

Accessing the Setup Wizard 35

1Enter your Internet IP address in the WAN IP field.

2Enter the subnet mask in the Subnet Mask field.

3Enter the default gateway IP address in the Default Gateway field.

4Enter the DNS address in the DNS field.

5Enter your VPI and VCI information in the VPI/VCI fields.

6Select the encapsulation type (LLC or VC MUX) in the Encapsulation drop-down menu. This information should be provided to you by your ISP.

7Check all of your settings, and then click Next.

The LAN Settings screen will then be displayed (refer to Figure 24).

Dynamic/Fixed IP in 1483 Bridge Mode (For Multiple PCs)

For bridge mode to work, you need to assign an IP address to the Router. You can either configure the Router to obtain an IP address automatically from a DHCP server or assign a fixed or static IP address to it.

Figure 23 Dynamic/Fixed IP for Bridge Mode Screen

To obtain an IP address automatically from a DHCP server: Check the Get WAN IP By DCHP checkbox, and then click Next. The LAN Settings screen will then be displayed (refer to Figure 24).