Accessing the Setup Wizard 31
4Check the Enable box in the Daylight Savings field, if daylight savings
applies to your area.
5Click Next.
Setup Wizard -
Connection Type
The Connection Type screen allows you to set up the Router for the type
of Internet connection you have. Before setting up your connection type,
have your account information from your ISP ready.
Figure18 Connection Type Screen
Select a DSL mode from the following:
■PPPoE — PPP over Ethernet, providing routing for multiple PCs, see
page 32
■PPPoA — PPP over ATM, providing routing for multiple PCs, see
page 33
■Bridge Mode (for a single PC) — RFC1483 Bridged Mode, for single
PCs only, see page34
■Routing Mode over ATM — RFC1483 Routed Mode, for multiple PCs,
see page 34
■Dynamic/Fixed IP in 1483 Bridge Mode (for multiple PCs), see page 35
and click Next.
For further information on selecting a mode see “Internet Settings” on
page 54.