3Com 3CRWDR101A-75, 3CRWDR101B-75 manual WPA with Radius Server Screen

Wireless Settings 49

WPA (with RADIUS Server)

WPA (Wi-Fi Protected Access) provides dynamic key changes and constitutes the best security solution. This function requires that a RADIUS server is running on the network.

Figure 37 WPA (with RADIUS Server) Screen

1Select WPA with RADIUS server from the Security Mode drop-down menu.

2Select WPA mode from the drop-down menu, three modes are supported: WPA, WPA2, and Mixed mode.

3Select Encryption technique from the drop-down menu, four options are available: TKIP, AES, Auto for WPA AES for WPA2, and AES for both WPA and WPA2.

4Enter the IP address of the RADIUS server on your network into the RADIUS Server field.

5Enter the port number that the RADIUS server is operating on in the RADIUS Port field.

6Enter the key for the RADIUS server in the RADIUS Key field.

7By default, the WPA keys are changed every hour, but if you want to change this setting, you can do so by specifying the required time in the Re-key Interval field.

8Click Apply.