54CHAPTER 5: CONFIGURING THE ROUTER
Internet Settings You can configure the settings for your DSL connection.
ATM PVC This feature is used to configure the parameters for your DSL connection. The information necessary to complete these screens should be obtained from your ISP. Check with your ISP first to find out what type of connection you should choose.
Figure 44 ATM PVC Screen
You should see the first entry already contains information that’s been configured using the Wizard in the initial setup. If you want to change that information or set up other connection, click Edit.
There are six options available for the DSL connection mode:
■PPPoE — PPP over Ethernet, providing routing for multiple PCs (see page 55)
■PPPoA — PPP over ATM, providing routing for multiple PCs (see page 57)
■Bridge Mode — RFC1483 Bridged Mode, for single PCs only (see page 59)
■Routing Mode over ATM — RFC1483 Routed Mode, for multiple PCs (see page 61)
■Dynamic/Fixed IP in 1483 Bridge Mode (for multiple PCs) (see page 63)
■Disable — To disable the Internet connection function (see page 64)
Click Edit to set the detailed settings.
