50CHAPTER 5: CONFIGURING THE ROUTER
Connection Control This feature is used to filter the clients based on their MAC addresses.
Check the Enable MAC Address Filtering checkbox, the Connection
Control screen will appear.
Figure 38 Connection Control Screen
There are two options available in the Access rule for registered MAC address field:
■if you click Allow, this means only the MAC addresses registered here in the list will be allowed to access the Router via wireless link.
■if you click Deny, this means the registered MAC addresses will not be able to access the Router via wireless link.
Use the MAC Address Filtering List to quickly copy the MAC addresses of the current wireless clients into the list table. You can define up to 32 MAC addresses to the list.
You can click Clear to delete the current entry in the list.
