Alcatel Carrier Internetworking Solutions 6600 manual Configuring the Flood Queue Bandwidth

Configuring High Availability VLANs

Configuring the Flood Queue Bandwidth

When the first HA VLAN is created on the switch, an ingress flood queue is automatically created for HA VLAN traffic. By default, the bandwidth size of this queue is set to 15mbps. To change the bandwidth size, use the vlan port-mac bandwidth command. For example, the following command sets the band- width value for HA VLAN 200 to 100mbps:

-> vlan 200 port-mac bandwidth 100

Note that when removing HA VLANs from the switch configuration, the flood queue remains in exist- ence until the last HA VLAN is removed.

Release 5.1.6.R02 User Guide Supplement June 2005 page 3-15