IPv6 Commands ipv6 load rip
Release 5.1.6.R02 User Guide Supplement June 2005 page 2-55
ipv6 load rip
Loads RIPng into memory. When the switch is initially configured, you must load RIPng into memory to
enable RIPng routing.
ipv6 load rip
Syntax Definitions
N/A.
Defaults
N/A.
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
•RIPng will support a maximum of 1,000 routes.
•RIPng will support a maximum of 20 interfaces.
•Use the ipv6 rip status command to enable RIPng on the switch.
Example
-> ipv6 load rip
Release History
Release 5.1.6; command was introduced.
Related Commands
MIB Objects
alaDrcTmConfig
alaDrcTmIPRipngStatus
ipv6 rip status Enables/disables RIPng routing on the switch.
show ipv6 rip Displays RIPng status and general configuration parameters.