show ipv6 neighbors | IPv6 Commands |
|
|
|
|
show ipv6 neighbors
Displays IPv6 Neighbor Table.
show ipv6 neighbors [ipv6_prefix/prefix_length if_name hw hardware_address static]
Syntax Definitions
ipv6_prefix/prefix_length | IPv6 prefix. Restricts the display to those neighbors starting with the |
| specified prefix. |
if_name | Interface name. Restricts the display to those neighbors reached via the |
| specified interface. |
hardware_address | MAC address. Restricts the display to the specified MAC address. |
static | Restricts display to statically configured neighbors. |
Defaults |
|
N/A. |
|
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
If you do not specify an option (e.g., if_name), all IPv6 neighbors are displayed.
Example
IPv6 Address | Hardware Address | State | Type | Port | Interface |
fe80::02d0:c0ff:fe86:1207 | 00:d0:c0:86:12:07 | Probe | Dynamic | 1/15 | vlan_4 |
fe80::020a:03ff:fe71:fe8d | 00:0a:03:71:fe:8d | Reachable Dynamic | 1/ 5 | vlan_17 | |
output definitions |
|
|
|
|
|
|
|
|
|
| |
IPv6 Address | The neighbor’s IPv6 address. |
|
|
| |
Hardware Address | The MAC address corresponding to the IPv6 address. |
| |||
State | The neighbor’s state: |
|
|
|
|
| - Unknown |
|
|
|
|
| - Incomplete |
|
|
|
|
| - Reachable |
|
|
|
|
| - Stale |
|
|
|
|
| - Delay |
|
|
|
|
| - Probe. |
|
|
|
|
Type | Indicates whether the neighbor entry is a Static or Dynamic entry. | ||||
Port | The port used to reach the neighbor. |
|
|
| |
Interface | The neighbor’s interface name (e.g., vlan_1) |
|
| ||
|
|
|
|
|
|
page | Release 5.1.6.R02 User Guide Supplement June 2005 |