
IPv6 Commands | ipv6 rip |
|
|
|
|
ipv6 rip holddown-timer
Configures the amount of time a route is placed in a holddown state. Whenever a route is seen from the same gateway with a higher metric than the route in the RIB, the route goes into holddown. This excludes route updates with an INFINITY metric.
ipv6 rip holddown-timer seconds
Syntax Definitions
seconds | Time, in seconds, that a route will remain in a holddown state. Valid | |
| range is 0 - 120. | |
Defaults |
|
|
|
|
|
parameter | default | |
|
|
|
seconds | 0 |
|
|
|
|
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
While in holddown, the route continues being announced as usual and used in the RIB. This interval is used to control route flap dampening.
Example
Release History
Release 5.1.6; command was introduced.
Related Commands
ipv6 rip | Configures the amount of time a route remains active in RIB before |
| being moved to the "Garbage" state. |
ipv6 rip | Configures the RIPng garbage timer value. |
MIB Objects
alaProtocolripng alaRipngHolddownTimer
Release 5.1.6.R02 User Guide Supplement June 2005 | page |