Alcatel Carrier Internetworking Solutions 6600 manual Ipv6 rip interface horizon

IPv6 Commands ipv6 rip interface horizon

ipv6 rip interface horizon

Configures the routing loop prevention mechanisms.

ipv6 rip interface if_name horizon {none split-only poison}

Syntax Definitions

if_name	IPv6 interface name.
none split-only poison	none - Disables loop prevention mechanisms.
	split-only- Enables split-horizon, without poison-reverse.
	poison - Enables split-horizon with poison-reverse.
Defaults

parameterdefault

none split-only poison poison

Platforms Supported

OmniSwitch 6624, 6648, 7700, 7800, 8800

Usage Guidelines

•If set to “none” the route is not sent back to the peer.

•If set to ‘split-only”, the route received from the peer is sent back with an increased metric.

•If set to “poison” the route received from the peer is sent back with an “infinity” metric.

Example

-> ipv6 rip interface Test_Lab none

Release History

Release 5.1.6; command was introduced.

Related Commands

show ipv6 rip interface	Displays information for all or specified RIPng interfaces.
show ipv6 rip routes	Displays all or a specific set of routes in the RIPng Routing Table.

MIB Objects

alaRipngInterfaceTable alaRipngInterfaceHorizon

Release 5.1.6.R02 User Guide Supplement June 2005 page 2-69