Alcatel Carrier Internetworking Solutions 6600 manual Vlan port-mac bandwidth

User Documentation Addendum vlan port-mac bandwidth

vlan port-mac bandwidth

Configures the bandwidth for the ingress flood queue associated with high availability (HA) VLANs.

vlan vid port-mac bandwidth mbps

Syntax Definitions

vid	An existing HA VLAN ID number (1–4094).
mbps	Bandwidth value for the specified HA VLAN flood queue (1mbps –
	1000mbps).

Defaults

By default, the flood queue bandwidth for an HA VLAN is set to 15 mbps.

Platforms Supported

OmniSwitch 7700, 7800, 8800

Usage Guidelines

•The VLAN ID specified with this command must be the ID for an HA VLAN. An HA VLAN contains at least one ingress or egress port and one MAC address.

•The ingress flood queue is created when the first HA VLAN is configured on the switch, and deleted when the last HA VLAN is removed from the switch.

Examples

-> vlan 10 port-mac bandwidth 50

-> vlan 200 port-mac bandwidth 1000

Release History

Release 5.1.6; command was introduced.

Related Commands

vlan port-mac ingress-port vlan port-mac egress-port

mac-address-table port-mac vlan mac

Adds and removes ingress ports from an HA VLAN. Adds and removes egress ports from an HA VLAN. Adds and removes MAC addresses from an HA VLAN.

MIB Objects

vlanTable

vlanNumber vlanHABandwidth

Release 5.1.6.R02 User Guide Supplement June 2005 page 1-3