Alcatel Carrier Internetworking Solutions 6600 manual Interval

show ipv6 rip IPv6 Commands

Release History

Release 5.1; command was introduced.

Related Commands

ipv6 rip status	Enables/disables RIPng routing on the switch.
ipv6 rip route-tag	Configures the route tag value for RIP routes generated by the
	switch.
ipv6 rip update-interval	Configures the Interval, in seconds, that RIPng routing updates are
	sent out.
ipv6 rip invalid-timer	Configures the amount of time a route remains active in RIB before
	being moved to the "garbage" state.
ipv6 rip invalid-timer	Configures the RIPng garbage timer value. Routes move into the
	garbage collection state because the timer expired or a route update
	with an INFINITY metric was received.
ipv6 rip holddown-timer	Configures the amount of time a route is placed in a holddown state.
ipv6 rip jitter	Configures an offset value for RIPng updates. This is the maximum
	(positive or negative) value that can be used to offset the update
	interval.
ipv6 rip triggered-sends	Configures the behavior of triggered updates.

MIB Objects

alaRipngInterfaceTable alaRipngInterfaceStatus alaRipngRouteTag laRipngInvalidTimer alaRipngGarbageTimer alaRipngHolddownTimer alaRipngJitter alaRipngTriggeredSends

page 2-74 Release 5.1.6.R02 User Guide Supplement June 2005