Alcatel Carrier Internetworking Solutions 6600 manual Show ipv6 rip peer

show ipv6 rip peer IPv6 Commands

show ipv6 rip peer

Displays a summary of the observed RIPng peers, or specific information about a peer when a peer address is provided.

show ipv6 rip peer [ipv6_addresss]

Syntax Definitions

ipv6_addresss IPv6 address of the peer.

Defaults

N/A.

Platforms Supported

OmniSwitch 6624, 6648, 7700, 7800, 8800

Usage Guidelines

If you do not specify a peer, all IPv6 RIP peers are displayed.

Example

-> show ipv6 peer
	Seen on	Packets	Last
Address	Interface	Recv	Update
-----------------------------	+-------------	+--------	+----------
fe80::200:39ff:fe1f:710c	vlan172	23	20
fe80::2d0:95ff:fe12:da40	bkbone20	33	2
fe80::2d0:95ff:fe12:da40	vlan150	26	25
fe80::2d0:95ff:fe6a:5d41	nssa23	20	25

-> show ipv6 rip peer fe80::2d0:95ff:fe12:da40

Peer#1 address	= fe80::2d0:95ff:fe12:da40,
Seen on interface	= bkbone20,
Last Update	= 8 secs,
Received packets	= 33,
Received bad packets	= 0
Received routes	= 5,
Received bad routes	= 0
Peer#2 address	= fe80::2d0:95ff:fe12:da40,
Seen on interface	= vlan150,
Last Update	= 1 secs,
Received packets	= 27,
Received bad packets	= 0
Received routes	= 2,
Received bad routes	= 0

page 2-78 Release 5.1.6.R02 User Guide Supplement June 2005