IPv6 Commandsshow ipv6 traffic
show ipv6 traffic
Displays IPv6 traffic statistics. show ipv6 traffic [if_name]
Syntax Definitions
if_name | Interface name. restricts the display to the specified interface instead of |
| global statistics. |
Defaults |
|
N/A. |
|
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
The statistics show the cumulative totals since the last time the switch was powered on, the last reset of the switch was executed or the traffic statistics were cleared using the command.
Example
IPv6 statistics |
|
Packets received |
|
Total | = 598174 |
Header errors | = 0 |
Too big | = 12718 |
No route | = 4 |
Address errors | = 0 |
Unknown protocol | = 0 |
Truncated packets | = 0 |
Local discards | = 0 |
Delivered to users | = 582306 |
Reassembly needed | = 0 |
Reassembled | = 0 |
Reassembly failed | = 0 |
Multicast Packets | = 118 |
Packets sent |
|
Forwarded | = 3146 |
Generated | = 432819 |
Local discards | = 0 |
Fragmented | = 0 |
Fragmentation failed | = 0 |
Fragments generated | = 0 |
Multicast packets | = 265 |
Release 5.1.6.R02 User Guide Supplement June 2005 | page |
