Alcatel Carrier Internetworking Solutions 6600 manual Ipv6 rip garbage-timer

ipv6 rip garbage-timer IPv6 Commands

ipv6 rip garbage-timer

Configures the RIPng garbage timer value. When a route in the RIB exceeds the configured Invalid Timer Value, the route is moved to a “Garbage” state in the the RIB. The garbage timer is the length of time a route will stay in this state before it is flushed from the RIB.

ipv6 rip garbage-timer seconds

Syntax Definitions

seconds	Time, in seconds, that a route will remain in the RIPng Routing Table
	before it is flushed from the RIB. Valid range is 0 - 180.
Defaults
parameter	default
seconds	120

Platforms Supported

OmniSwitch 6624, 6648, 7700, 7800, 8800

Usage Guidelines

Use the ipv6 rip invalid-timercommand to set the Invalid Timer Value.

Example

-> ipv6 rip garbage-timer 180

Release History

Release 5.1.6; command was introduced.

Related Commands

ipv6 rip invalid-timer	Configures the amount of time a route remains active in RIB before
	being moved to the "Garbage" state.
ipv6 rip holddown-timer	Configures the amount of time a route is placed in a holddown state.

MIB Objects

alaProtocolripng alaRipngGarbageTimer

page 2-58 Release 5.1.6.R02 User Guide Supplement June 2005