Alcatel Carrier Internetworking Solutions 6600 Show ipv6 interface, IPv6 Address/Prefix Length

show ipv6 interface IPv6 Commands

show ipv6 interface

Displays IPv6 Interface Table.

show ipv6 interface [if_name loopback]

Syntax Definitions

if_name	Interface name. Limits the display to a specific interface.
loopback	Limits display to loopback interfaces.
Defaults
N/A.

Platforms Supported

OmniSwitch 6624, 6648, 7700, 7800, 8800

Usage Guidelines

•If you do not specify an interface name, all IPv6 interfaces are displayed.

•Specify an interface name (e.g., VLAN 12) to obtain more detailed information about a specific inter- face.

Example

-> show ipv6 interface

Name	IPv6 Address/Prefix Length		Status	Device
--------------------+	----------------------------------------	+	---------	+--------
smbif-5	fe80::2d0:95ff:fe12:f470/64		Active	VLAN 955
	212:95:5::35/64
	212:95:5::/64
v6if-to-eagle	fe80::2d0:95ff:fe12:f470/64		Disabled	VLAN 1002
	195:35::35/64
	195:35::/64
V6if-6to4-137	2002:d423:2323::35/64		Active	6to4 Tunnel
	2002:d423:2323::/64
v6if-tunnel-137	fe80::2d0:95ff:fe12:f470/64		Disabled	Tunnel 2
	137:35:35::35/64
	137:35:35::/64		Active	loopback
loopback	::1/128
output definitions
Name		Interface name. This is usually the VLAN on which the interface is
		configured.
IPv6 Address/Prefix Length		IPv6 address and prefix length assigned to the interface. If an interface
		has more than one IPv6 address assigned to it, each address is shown on
		a separate line.
Status		Interface status (e.g., Active/Inactive).
Device		The device on which the interface is configured (e.g., VLAN 955).

page 2-30 Release 5.1.6.R02 User Guide Supplement June 2005