Alcatel Carrier Internetworking Solutions 6600 manual Ipv6 rip triggered-sends, Update packets

IPv6 Commands ipv6 rip triggered-sends

ipv6 rip triggered-sends

Configures the behavior of triggered updates.

ipv6 rip triggered-sends {all updated-only none}

Syntax Definitions

all	All RIPng routes are added to any triggered updates.
updated-only	Only route changes that are causing the triggered update are included in
	the update packets.
none	RIPng routes are not added to triggered updates.
Defaults

parameterdefault

all updated-only none updated-only

Platforms Supported

OmniSwitch 6624, 6648, 7700, 7800, 8800

Usage Guidelines

•If set to “all”, all routes are sent in the update, not just route changes, which increases RIPng traffic on the network.

•If set to “none”, no triggered updates are sent, which can cause delays in network convergence.

Example

-> ipv6 rip triggered-sends none

Release History

Release 5.1.6; command was introduced.

Related Commands

show ipv6 rip Displays RIPng status and general configuration information.

MIB Objects

alaProtocolripng alaRipngTriggeredSends

Release 5.1.6.R02 User Guide Supplement June 2005 page 2-63