![](/images/new-backgrounds/1231070/231070135x1.webp)
Rack Mounting MAX Servers
Rack Mounting MMS-01S/02S/02SB/04S/12S Servers
Each Rack Rail Installation Kit supports one server, and the parts included in the rack rail hardware kit include:
Two Outer Slide Rails
Two Inner Server Rails
Two Long Extension Brackets
Two Short Extension Brackets
Four
Four
Variety of screws (20 large, 20 small/long and 20 small/short)
Locking Tab Hole
Outer Slide Rail (2)
Inner Server Rail (2)
Extension Bracket (2 Short)
Extension Bracket (2 Long)
4 - Large holes
4 - Small holes
FIG. 53 Included Rack-Mounting Kit Parts
Locking Release Tab
Screws:
•20 - Large
•20 - Small/Long
•12 - Small/Short
You may not need all the parts included in the rack rail hardware kit for every installation. You may have some parts left over.
The basic steps for installing the MMS server into a rack are:
1.Prepare the Slide Rail Assemblies: The Inner and Outer Rails must be separated before they can be attached to the MMS and the rack.
2.Attach the Inner Server Rails to the MMS Server.
3.Attach the Extension Brackets to the Outer Slide Rails.
4.Install the Outer Slide Rails in the server.
5.Slide the server (with Inner Server Rails attached) into the Outer Slide Rails in the rack.
Each step is described in more detail in the following subsections.
62 | MAX Servers: HT Home Theater and MMS Multimedia Servers |