![](/images/new-backgrounds/1231070/231070149x1.webp)
Rack Mounting MAX Servers
FRONT VIEW | REAR VIEW |
The bottom of the Adapter Bar sits flush against the tabs on the
Use these holes to mount the Adapter | Use the outside and center holes to mount |
Bar to the | the |
| the equipment rack |
FIG. 61 Adapter Bar mounted to the front of the Rack-Rail assembly
2.Attach an Adapter Bar to the rear of each of the two
Mounting rails on equipment rack
Adapter Bar
(front)
Rail Assembly
Adapter Bar
(rear)
FIG. 62 Mount the Adapter Bars to the Rail assemblies
Step 5: Mount the Rail/Bracket Assemblies Into the Equipment Rack
Once the Extension Brackets (or End Brackets) and Adapter Bars have been attached to the Rail Assemblies, the Rail/Bracket Assemblies are ready to be mounted into the equipment rack.
Install the
MAX Servers: HT Home Theater and MMS Multimedia Servers | 69 |
|
|