AMX MAX Servers manual Rack Mounting HT and MMS-900 Servers

Rack Mounting MAX Servers

Inner Server Rail

Outer Slide Rail

Extension Bracket

Rack (front)

FIG. 56 Sliding the MMS server chassis into the rack

Rack Mounting HT and MMS-900 Servers

Each MAX-HT server comes with a Rack-Mounting Kit. Each Rack-Mounting Kit supports one server and includes all hardware required to mount HT servers in a standard 19-inch (48-cm) equipment rack. The parts included in the Kit include:

2 Slide Rail Assemblies (each consists of a Stationary section, an Intermediate section and a Chassis section; pre-assembled for shipping)

2 Extension Brackets

2 End Brackets

6 Locking Plates (4-hole) - not required

4 Adapter Bars (9-hole)

10 flat-head screws, 10 round-head screws

Locking Tab Hole

INTERMEDIATE SECTION (2)

STATIONARY SECTION (2)

CHASSIS SECTION (2)

Locking Release Tab

Extension Brackets (2) End Brackets (2) Locking Plates (6) Adapter Bars (4)

Screws: 10 round head, 10 flat head, 10 locking nuts

FIG. 57 Included Rack Kit Parts

MAX Servers: HT Home Theater and MMS Multimedia Servers 65