Wiring and Connections

Ferrite Installation (Required)

Metreau Entry Communicators comes with a Cat5 Suppression Ferrite that must be clipped around the Ethernet cable, inside the wall box (no tools required).

1. Release the latch to open

2. Insert the Cat5 cable

3. Installation complete.

the plastic enclosure.

and close the enclosure.

 

FIG. 8 Installing the CAT5 Suppression Ferrite

When positioning the Ferrite clip inside the wall box, place the bottom of the clip flat against the back inside surface of the wall box, to allow sufficient room for the Metreau Entry Communicator unit (FIG. 9).

Ferrite clip installed on Ethernet cable

Ethernet cable and connector

Wall Box (front view)

Ensure that the Ferrite clip is resting flat against the inside back surface of the wall box to allow room for the Metreau Entry Communicator unit

FIG. 9 Fitting the Ferrite clip and Ethernet cable inside the Conduit Box

12

Metreau Entry Communicators

Page 18
Image 18
AMX MET-ECOM-D manual Ferrite Installation Required, Installing the CAT5 Suppression Ferrite