Using the NetLinx Module

Using the NetLinx Module

Overview

Metreau Entry Communicators can be controlled via the Touch Pages provided with the NetLinx Module, as described in this section. Refer to the NetLinx module documentation for details on incorporating the module into your source code and loading it onto the NetLinx Master.

The Door (doorbell) functionality required by Metreau Entry Communicators is contained within the NetLinx Module, which also contains Intercom functionality required for the Door functions.

The module used by the Metreau Entry Communicators is the AMX intercom module (the same module used by other intercom-capable AMX touch panels), updated to support communicators.

Incorporating an Intercom Panel Into Your NetLinx System

Download the module for the intercom panel from www.amx.com, and include it in your NetLinx project file. For searching purposes, the module manufacturer is AMX and the model is Intercom.

The intercom module will only work with AMX intercom capable panels.

Panel Intercom Configuration

Intercom Setup

The Intercom Setup page (FIG. 47) allows you to set the session timeout for intercom calls, toggle intercom auto-answer on and off, and provides access to the Door Setup and Advanced Setup pages.

FIG. 47 Intercom Setup Page

Metreau Entry Communicators

65

 

 

Page 71
Image 71
AMX MET-ECOM-D manual Using the NetLinx Module, Incorporating an Intercom Panel Into Your NetLinx System, Intercom Setup