Using the NetLinx Module
The options in this page allow you see and view the incoming doorbell call, as well as adjust the microphone and speaker volume levels for both the doorbell and the panel.
Door Microphone Level - Use the Up/Down arrow buttons to raise/lower the doorbell’s microphone level. The current microphone level for the doorbell is indicated in the bargraph. Press the Mute button to mute the doorbell microphone.
Door Speaker Level - Use the Up/Down arrow buttons to raise/lower the doorbell’s speaker level. The current speaker level for the doorbell is indicated in the bargraph. Press the Mute button to mute the doorbell speaker.
Panel Microphone Level - Use the Up/Down arrow buttons to raise/lower the panel’s microphone level. The current microphone level for the panel is indicated in the bargraph. Press the Mute button to mute the panel microphone.
Panel Speaker Level - Use the Up/Down arrow buttons to raise/lower the panel’s speaker level. The current speaker level for the panel is indicated in the bargraph. Press the Mute button to mute the panel speaker.
The Doorbell Mute buttons only perform mute. They do not perform
Ending a Doorbell Call
Press the End Call button in the Someone At The Door page to terminate the intercom session with the doorbell.
Creating Intercom Pages
The easiest method of creating your own intercom pages is to start with the pages provided by AMX in the module. You can change the aesthetics of the pages as long as the channel, address, level and links remain untouched.
For the more ambitious panel designers, the necessary intercom directory buttons and their information are contained in the Sample Intercom Page table on page 74.
Advanced Setup page
Advanced Setup
Name | Description | Channel | Address |
|
| Port:Code | Port:Code |
|
|
|
|
Allow Panel to be | Toggle the panel’s ability to be monitored off and on. | 1:11 |
|
Monitored |
|
|
|
|
|
|
|
Allow Panel to | Toggle the panel’s ability to monitor off and on. | 1:10 |
|
Monitor |
|
|
|
|
|
|
|
Room Name | The name of the panel as it appears in other intercom |
| 0:265 |
| directories. See Naming a panel section on page 70. |
|
|
|
|
|
|
Name Panel | Set the name of the panel as it appears in other intercom | 0:334 | 0:265 |
| directories. (G4 Web Control: Server Name) |
|
|
|
|
|
|
Back | Navigates the intercom panel to the intercom Setup page. This |
|
|
| requires a standard page flip to Setup. |
|
|
|
|
|
|
72 | Metreau Entry Communicators |
