Add and register handsets | AT&T SB67118 instruction

Press MENU on BS, sel Registration & sel Register HS. Then put HS in cradle.

Getting started

Add and register handsets

Your telephone can support up to 10 cordless handsets or nine cordless handsets and one cordless headset. You can add new handsets and headset (AT&T model SB67108 and TL7600, sold separately) to the SB67118 at any time, but each new handset or headset must be registered with the telephone base before use. You must register each handset and headset separately.

The handset provided with your SB67118 is pre-registered as Handset 1. Additional handsets are assigned numbers in the order they are registered (Handset 2 to Handset 10).

If the handset does not have enough power to proceed with the registration, you need to charge the new handset for at least five

minutes (see Battery installation and charging in the SB67108 cordless handset manual). Start registration when the handset screen shows Press MENU on BS, sel

Registration & sel Register HS. Then put HS in cradle.

To register a handset to your telephone base

1.Make sure the handset is out of the charger and the screen shows

Press MENU on BS, sel Registration & sel Register HS. Then put HS in

cradle. before you begin registration.

2. On the telephone base, press MENU/ENTER.

COVM

Speed dial setup Customer support

>Registration

3.Scroll down to Registration and press MENU/ENTER.

4.Press MENU/ENTER again to select Register HS.

5.Place the unregistered handset into the cradle. The telephone base screen shows Handset registering. It takes up to 60 seconds to complete the registration. There is a beep sound when the registration is successful. The handset shows Handset registered, and then shows X:Handset X (X represents the extension number [1-0]; Handset X represents the default handset name).

>Register HS Cordless headset Deregistration

Handset registering

Handset registered

NOTES:

1.If the registration is not successful, the telephone base screen displays Error. To reset the handset, remove the handset from the cradle. Try the registration process again.

2.Please make sure to remove all unregistered system handsets or cordless headset from the cradles before registering a new handset.

2:Handset 2

Set date & time Charging

10

Image 16

AT&T SB67118 user manual Add and register handsets

Contents

User’s manual Congratulations Parts checklist SB67118 Table of contents SB67118 Dect Telephone base operation Index Quick reference guide Exit Directory card Using menus Main menu Installation Avoid placing the telephone base too close to Planning your system Important Information Telephone base installation To connect the telephone line cords to the telephone base Option 2 To connect four one-line wall jacks Optional backup battery installation Add and register handsets Add and register a cordless headset To register a cordless headset to your telephone base Add and register a cordless headset Deregister handsets and headset Add a corded headset To add a corded headset to the telephone base Optional audio cable To use an audio cable Menu settings Telephone base setupRinger volume Volume control Ringer tone Ring group Do not disturb DND Key tone LCD contrastLanguage Set line mode Line selection Area codes Hold reminder Set date and time Turning MOH on or off Music on hold MOHReviewing the recording Recording music or message using an audio device Recording music or message using the corded handset Auto attendant setup for answering system Record announcement auto attendant Record extension list Number of rings auto attendant Number of rings general mailbox Mailbox setup for answering systemRecord announcement independent mailbox Select announcement Press or to scroll to an announcement Set access code remote code Mailbox setup for general mailboxCall screening Set alert number Notify alertTurn alert on or off Screen displays Press Spkr to confirm the alert call Call alert confirmationRemaining space Enter, edit or delete a speed dial number Speed dial setupCustomer support Indicator tones Screen icons, indicator tones and lightsScreen icons Indicator lights NEW Call Line indicators Telephone base basic operationMaking a call To make a call from the telephone base To end a call from the telephone base Using the speakerphone To make a call with a corded headsetTo make a call with a cordless headset On-hook dialing predialing Answering a call To answer a call Temporary ringer silencingLast number redialing To view the 10 most recently dialed numbers Options while on calls To enable call privacy To cancel call privacyCall privacy Recording a call While recording a phone conversation To play back a memo or phone conversationTo mute a call To un-mute a call Hold reminder on Switching between linesJoin a call in progress To access the directory while on a call Chain dialingThree-way conference calls To make a three-way conference call To talk privately with one internal party To drop one lineTo drop an intercom To end a conference call Covm reset Covm central office voicemail Intercom Make an intercom call to a cordless handset Answer an intercom call Answer an incoming call during an intercom call Call transfer Blind transferPress the one-touchEXT 1-0 key for the desired extension Or to scroll to the desired extension, then Other options for answering the transferred call PTT to a single handset Push to talk PTT intercomPTT to all handsets Convert PTT call to intercom call Answer a PTT callEnd a PTT call Capacity About the directoryExit the directory Create directory entries Create a new directory entry Store a pause in a directory number Store a flash in a directory number Review directory entries Review directoryDirectory empty Search by name Search directoryPress or browse through the directory Dial, delete or edit entries About Caller ID Information about caller ID with call waiting How the caller ID information call log works Caller ID InformationScreen display of the telephone base Missed new calls indicator Caller ID operationMemory match Review the caller ID information Make a call log entry ready to dial Dial a call log entryDelete entries Delete a caller ID entry Delete all caller ID entries When the telephone number appears Save a call log entry to the directory Reasons for missing caller ID information Reasons for missing caller ID informationOn-screen message Reason Answering system and voicemail Messages on Setting your system to automatically answer calls An example of a 2-line answering system setupGeneral mailbox gen MB only Auto attendant auto att An example of a 4-line answering system setup Select the answer modeAns-Gen MB only, Ans-Auto att, or No answer Answering system capacity Auto attendant operation Using the auto attendantTurn the auto attendant on Base Missed call 0800AM 12/30 AuAt Auto attendant flow chart Answering system operation When messages are playing on the telephone base To listen to messages at the telephone baseOptions during playback Delete all old messages When a message is playing on the telephone Transfer messageRecording and delivering memos To record a memo, then deliver it Play back a memo Disable the answering systemSet general delivery mailbox to not answer Remote commands Remote accessTo remotely reach the answering system Remote access Cordless headset operation Cordless headset extension number Telephone base display screen messages Deregistering Message full Maintenance Taking care of your telephone Important safety information Safety information Especially about cordless telephones FCC part 68 and Acta Industry Canada FCC part Limited warranty Limited warranty Technical specifications Dect 6.0 digital technology Troubleshooting Backup battery installation on page 9in this If the other telephone in your building are having Relocate your telephone to a higher location. Troubleshooting Troubleshooting Troubleshooting While recording Troubleshooting Index Index Index Index Remote access wallet card Action Remote command