Getting started
Telephone base setup
7.Press MENU/ENTER to save the setting and return to the previous menu. There is a confirmation tone. To exit without making changes, press EXIT.
Area codes
Use this feature to program this system to recognize one home area code and up to four local area codes. This feature makes it easy for you to place a call from the caller ID log.
If you dial seven digits to make a local call (no area code required), enter your area code into the telephone as the home area code. When you receive a call from within your home area code, the caller ID information only displays the seven digits of the telephone number, and when you dial from the call log, only seven digits are dialed.
If you must dial 10 digits (the area code and telephone number) for local calls, enter 000 for the home area code and enter your area code as a local area code. Then, if you receive a call from within your area code, the screen displays the 10 digits of the telephone number, and when you dial from the call log, all 10 digits will be dialed.
If you have more than one area code for your region, enter those area codes as local area codes.
1.When the telephone is idle, press MENU/ENTER.
2.Press 
or 
to scroll to Base setup. Press MENU/ENTER.
3.Press 
or 
to scroll to Area codes. Press MENU/ENTER.
4.Press 
or 
to scroll to Home area or Local area 1- Local area 4. Press MENU/ENTER to edit it.
5.Use the dial pad keys to enter a 
REP or SKIP
to scroll to the digit you want to edit, or press REMOVE to delete digits while entering.
6.Press MENU/ENTER to save the setting and return to the previous menu. There is a confirmation tone. To exit without making changes, press EXIT.
Call log Ringer setting Mailbox setup
>Base setup
Language
Line selection Set line mode
>Area codes
>Home area Local area 1 Local area 2 Local area 3
Enter code: 000 
ENTER=Save
Home area: 000
21
